Do not point laser directly or indirectly (through reective surfaces) at eye.
Features
• Safely measure surface temperatures of hot, hazardous or
hard-to-reach objects without contact
• User selectable °F or °C
• Built-in laser pointer identies target area
• 8:1 Distance to Spot Size ratio
• Fixed emissivity covers 90% of all applications
• Automatic Data hold
• Display backlight
• Low battery indication with auto shut off
• Includes battery
Specifications
Temperature Range: -58 to 536°F (-50 to 280°C)
Accuracy: ±2% or ±2°C
Resolution: 1°F or (°C)
Response Time: ≤ 0.8s
Emissivity: 0.95 Fixed
Optical Resolution: 8:1
Spectral Response: 5 to 14μm
Power Supply: 9V (included)
Dimensions: 3.7 x 2.1 x 1” (94 x 56 x 28mm)
Weight: 2.7 oz (76g)
InstrumentsDescription
1. LCD Display 5. Laser
2. Back Light Button 6. Infrared Lens
3. Laser Button 7. Measuring Trigger
4. °C / °F Button 8. Battery Cover
DisplayDescription
1. Laser Signal
2. Data Hold Icon
3. Low Battery Symbol
4. °C / °F Symbol
5. Current Temperature
OpticalResolutionInformation:
1. When taking measurements, point thermometer toward the de-
sired object and hold the trigger. The object should be larger than
the spot size.
2. Optical Resolution: As the distance from the object increases, the
measuring spot size area becomes larger.
3.
Field of view: Make sure the target is larger than the unit’s spot
size. The smaller the target the closer you must be. When accuracy
is critical, make sure the target is at least twice as large as the spot
size
.
4. Emissivity: Most organic materials, painted or oxidized surfaces
have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings
will result from measuring shiny or polished metal surfaces. To
compensate, cover the surface to be measured with masking tape
or black paint. Measure the covered surface when it reaches the
same temperature as the material underneath.
Introduction
Compact, rugged and easy to use. Just aim and push the button, it reads
current surface temperatures in less than a second press the trigger to
display reading & battery icon. Release the trigger and the reading will
hold for 15 seconds.
How it works
The Infrared thermometer measures the surface temperature of an object.
The unit’s optical sensor emits, reects, and transmits energy which is
collected and focused onto a detector. The unit’s electronics translate the
information into a temperature reading which is displayed on the unit.
Cautions
Infrared thermometers should be protected from the following:
1. EMF (electro-magnetic elds) from arc welders, induction heaters.
2. Thermal shock (caused by large or abrupt ambient temperature
changes, it allows 30 minutes for unit to stabilize before use).
3. Do not leave the unit on or near objects of high temperature.
Maintenance
1. Lens cleaning: Use compressed air to blow off loose particles, use
a soft brush to remove debris away, and clean it with damp cotton
cloth.
2. Case cleaning: Clean the case with a damp sponge/cloth and mild
soap.
3. Do not use solvent to clean lens.
4. Do not submerge the unit in water.
Battery Replacement
1. Pull battery cover away from unit
2. Replace with battery respecting the polarity 9v.
For service on this or any other REED product or information on other REED products,
contact REED Instruments at info@reedinstruments.com
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Reed R2001 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Reed R2001 in the language / languages: English as an attachment in your email.
The manual is 0,34 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
