672949
41
Zoom out
Zoom in
Previous page
1/44
Next page
Maintenance and Fault Finding
39
www.raymarine.com
Compass information displayed on the system does not agree with the
main steering compass.
Ensure that the main steering compass has been swung correctly and
is showing correct information. Ensure that the display system has
completed correctly the "Swing" procedure described on page 32. If
there are still differences, look for magnetic objects (loud speakers,
pumps and motors, etc.) close to the transducer and try mounting the
compass transducer in an alternative location. After changing position of
nearby equipment or the Compass Transducer it will be necessary to re-
swing the compass following the procedure on page 32.
Boat Speed reads 0.
Information being transmitted from the Hull Transmitter is being received
with a zero value. Check the paddle wheel for fouling, clean it and make
sure it turns easily.
Wind Speed reads 0.
Information being transmitted from the Wind Transmitter is being
received with a zero value. If the anemometer cups at the top of the mast
are turning and the wind speed reads zero then there is a problem with
your Wind Transmitter.
No NMEA data showing on external displays.
From any Digital display enter Setup and Calibration Mode (page 18)
and scroll through to the Health Chapter. Check the signal level and
battery status of the Wireless (NMEA) Interface. If the signal level shows
a value of greater than 3 then check the data connections and the
settings of the NMEA source equipment to ensure that NMEA 0183 is
being transmitted correctly.
The Depth Alarm does not sound.
If the actual water depth is shallow and the alarm has not sounded it is
most likely that the alarm is switched off. From any Digital Display enter
Setup and Calibration Mode (page 18) and scroll through to the Depth
Chapter. Ensure the Depth Alarm settings are correct.
The "Master Display" is the display which was used to power up the
entire system. This display may be different each time the system
is used. If you are fault finding and are uncertain which display is
the master the switch off the system and switch on again. The
display which you switched on is now the Master.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine MN100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine MN100 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine MN100

Raymarine MN100 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info