656990
8
Zoom out
Zoom in
Previous page
1/12
Next page
4 Gebruiksaanwijzing LifeTag systeem
What happens when an alarm occurs?
When an alarm is initiated
To silence the alarm
To cancel a LifeTag alarm
01234
seconds
Repeat every 1 s
until alarm is
silenced
The Alarm buzzer sounds
Optional 12 V output
Other SeaTalk products
Note: This will NOT cancel the alarm, but will reduce the
alarm to 3 beeps every 30 seconds.
Hold in a Tag button for 5 seconds
D8986-1
If the LifeTag Base Station is connected to a SeaTalk system which includes a SeaTalk chartplotter and GPS,
and a LifeTag alarm occurs, a MOB marker will be displayed on the chartplotter at the location of the MOB
event. In addition, the chartplotter and compatible SeaTalk instruments (such as ST60+ and ST290 Graphic
instruments) will display a dedicated MOB alarm page.
This occurs only with compatible products on SeaTalk systems. It does NOT occur on other products
connected via NMEA0183.
If a LifeTag alarm is canceled from another SeaTalk product, this will cancel the entire MOB event, so that all
displayed MOB information, including the MOB waypoint, will be removed.
When an alarm condition exists, the Base Station optional switched output provides 12 V as a switching
voltage, for external equipment, until the alarm is silenced.
1. Silence the alarm, as described above.
2. Release the Tag button, then wait for at least
15 seconds.
2. Hold in the Tag button for a further 5 seconds.
10 20 30
seconds
0
Elke 1 seconde
herhaald tot alarm
wordt stilgezet
klinkt de alarmzoemer
Wat gebeurt er als het alarm wordt geactiveerd?
Als het alarm wordt geactiveerd:
seconden
Optionele 12 V uitgang
Als een alarmtoestand blijft bestaan, geeft de optionele geschakelde uitgang van het basisstation een
uitgangssignaal van 12 V als schakelspanning voor externe apparatuur, tot het alarm wordt stilgezet.
Andere SeaTalk producten
Als het LifeTag basisstation aangesloten is op een SeaTalk systeem met een SeaTalk kaartplotter en GPS en
een LifeTag alarm wordt geactiveerd, wordt op de kaartplotter een MOB markering weergegeven op de
positie van de MOB gebeurtenis. Bovendien geven de kaartplotter en compatibele SeaTalk instrumenten
(zoals ST60+ en ST290 Graphic) een speciale MOB alarmpagina weer.
Dit gebeurt alleen bij compatibele producten in SeaTalk systemen, NIET bij andere producten die via
NMEA0183 aangesloten zijn.
Als een LifeTag alarm vanaf een ander product wordt opgeheven, wordt de MOB in zijn geheel opgeheven,
zodat alle getoonde MOB informatie, inclusief het MOB waypoint, wordt verwijderd.
Het alarm stilzetten:
Houd de knop van een Tag 5 seconden ingedrukt.
NB: hiermee heft u het alarm NIET op, maar er klinken dan nog
slechts elke 30 seconden 3 pieptonen.
seconden
Een LifeTag alarm opheffen:
1. Zet het alarm stil, zoals hierboven beschreven.
2. Laat de knop van de Tag los en wacht ten minste
15 seconden.
3. Houd de knop van de Tag nog eens 5 seconden ingedrukt.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Life Tag at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Life Tag in the language / languages: Dutch as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine Life Tag

Raymarine Life Tag User Manual - English - 12 pages

Raymarine Life Tag Installation Guide - English - 20 pages

Raymarine Life Tag User Manual - German - 10 pages

Raymarine Life Tag Installation Guide - German - 20 pages

Raymarine Life Tag Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info