656920
2
Zoom out
Zoom in
Previous page
1/2
Next page
CAM 50
User Guide
Technical SupportTechnical SpecificationMaintenance
If you do not have a breaker in the power
circuit, an in-line 0.5 A quick blow fuse should
be fitted to the positive (red) lead of the cable.
Maintenance and
Troubleshooting
Your Raymarine CAM 100 does not contain
user-serviceable parts. They should be
serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.
Routine Maintenance
Routine maintenance should be carried out on
a regular basis:
Examine all cables for signs of damage
such as chafing, cuts or nicks.
Check that all cables are securely
connected.
Spray the camera and lens with fresh water
and wipe with a soft lint-free cloth to
remove debris or salt deposits.
Troubleshooting
Waste Electrical and Electronic
Equipment (WEEE) Directive
Raymarine fully complies with the
WEEE directive and as part of its envi-
ronmental policy asks you to be aware
of how you should dispose of this
product properly. The crossed out wheelie bin,
illustrated on the left, and found on our prod-
ucts signifies that this product should not be
disposed of in general waste or landfill. Please
contact your local dealer, national distributor or
Raymarine Technical Services for information
on product disposal.
Restriction of the use of certain
Hazardous Substances
This product uses components
that comply with the requirements
of the Restriction of the use of
certain Hazardous Substances
(RoHS) Directive 2002/95/EC.
Warranty
To register your new Raymarine product,
please take a few minutes to visit our website
www.raymarine.com. It is important that
you register to receive full warranty benefits.
Technical support
Complete product information and interactive
help is available at:
www.raymarine.com
Problem Solution
Camera does not
function
1. Make sure that the cable is
sound and that all connec-
tions are tight and free from
corrosion.
2. Check system fuses.
3. Check that the display is set up
correctly to receive the
images.
Refer to the relevant display
handbook for full details.
Red +12 V
Black - 0 V
Video connector
D8537_1
Format NTSC 512 x 492 pixels
PAL 500x 582 pixels
Imager 1/3 Sony DSP Color CCD
Horizontal resolution 380TVL
Scanning system NTSC 525 lines 2:1 interlaced
PAL 625 lines
Video output Composite 75 Ohms
Shutter speed NTSC 1/60 - 1/100.000sec
PAL - 1/50 - 1/100.000 sec
Minimum illumina-
tion
0.3 Lux at F2
Waterproof IP63
Power connection 12 V tinned leads
Video connections Female BNC
Operating tempera-
tures
-10
o
C to +50
o
C (-14
o
F to 122
o
F)
Power consumption 80 mA with regulated power
input.
Lens 3.6 mm
Best focus - 1.5 m
Viewable distance - 3.5 m
Document No:81294_1 Date: December 2006
RoHS
COMPLIANT
81294_1.fm Page 2 Friday, September 15, 2006 9:29 AM
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Cam50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Cam50 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info