656919
1
Zoom out
Zoom in
Previous page
1/2
Next page
Crop
Cro
Cro
Cro
Crop
Cro
Cro
Crop
Fol
Fol
Fol
Fol
Document number: 81272_1 Date: November 2005
User Guide
Installation
The adapter cable should be used to connect the display and the power supply to
the camera. The adapter cable connections are shown below
.
If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse
should be fitted to the positive (red) lead of the cable.
Maintenance and Troubleshooting
Your Raymarine CAM 100 does not contain user-serviceable parts.
They should be serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.
Routine Maintenance
Routine maintenance should be carried out on a regular basis:
Examine all cables for signs of damage such as chafing, cuts or nicks.
Check that all cables are securely connected.
Spray the camera and lens with fresh water and wipe with a soft lint-free
cloth to remove debris or salt deposits.
Troubleshooting
EMC conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. The design and
manufacture of Raymarine equipment and accessories conforms to the
appropriate Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not compromis
ed.
Problem Solution
Camera does not function 1. Make sure that the cable is sound and
that all connections are tight and free
from corrosion.
2. Check system fuses.
3. Check that the display is set up
correctly to receive the images.
Refer to the relevant display
handbook for full details.
Red +12 V
Black - 0 V
Video connecto
r
D8537_1
CAM 100
Technical specification
Format PAL 752 x 582 pixels
NTSC 768 x 494 pixels
Imager 1/3 Sony Super HAD CCD (Super Hi resolution)
Horizontal resolution 550 TVL
Scanning system PAL 625 lines
NTSC 525 lines 2:1 interlaced
Video output Composite 75 Ohms
Infra red 14 IR LEDs
LED spectrum 30 degrees for 15m
Minimum illumination 0.1 Lux at F2 - no IR, 0 Lux - with IR
Waterproof IPX6 and CFR46
Power connection 12 V tinned leads
Video connections Male BNC
Operating temperatures
-10
o
C to +55
o
C (-14
o
F to 130
o
F)
Power consumption 130 mA - day, 280 mA - night, IR on @12 V DC
Technical Support
D8531_1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Cam100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Cam100 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine Cam100

Raymarine Cam100 Installation Guide - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info