632971
16
Zoom out
Zoom in
Previous page
1/17
Next page
POWER SEATING OWNERS MANUAL
60° and 70° (FIGURE 10)
1. Remove the footrest from the wheelchair. Refer to INSTALLING/REMOVING
SWINGAWAY FOOTREST in this procedure of the manual.
2. Remove the hex screw and coved spacer and slide the footrest up or down on its mounting tube
until the desired footrest height is achieved.
3. Reassemble the hex screw and coved spacer through the footrest upper support and mounting
tube as shown in FIGURE 10.
4. Securely tighten the hex screw and coved spacer.
5. Install the footrest assembly onto the wheelchair. Refer to INSTALLING/REMOVING
SWINGAWAY FOOTREST in this procedure of the manual.
6. Repeat STEPS 1-5 for the opposite side of the wheelchair, if necessary.
FIGURE 10 – ADJUSTING SWINGAWAY FOOTREST HEIGHT –
60° AND 70°
70° AND 90° FOOTRESTS (FIGURE 11)
Adjusting
1. Remove any accessories that are attached to the footrests.
2. Remove the 6mm socket bolt, coved washer and 6mm locknut that secure the footplate to the
footrest support.
3. Reposition the footplate to the desired height.
4. Reinstall the socket bolt through the mounting holes of the footplate and footrest support.
WARNING:
DO NOT over tighten socket bolt and locknut. Footrest MUST be able to rotate
upward from the horizontal to the vertical position. Secure the footplate to the footrest
support with the coved washer and locknut.
FIGURE 11 – INSTALLING/REMOVING/ADJUSTING THE FOOTREST
70° MFX AND 90° FOOTRESTS
EMC Part: 19254300 Rev. 03 07/28/06
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rascal 330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rascal 330 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info