55519
4
Zoom out
Zoom in
Previous page
1/24
Next page
Toestand van de batterijen: - inhoud wit: batterijen zijn leeg
-
lopende balkjes: batterijen worden geladen
- 3 zwarte balkjes: batterijen zijn vol
De telefoon is in gebruik - extern gesprek.
Knipperend: er komt een externe oproep binnen
De telefoon is in gebruik - intern gesprek.
Knipperend: er komt een interne oproep binnen
De handsetmicrofoon is uitgeschakeld.
Nieuw nummer/naam in nummerweergavegeheugen of de nummers/ namen worden
bekeken.
Er wordt in het telefoonboek gekeken
Het belsignaal is uitgeschakeld.
Continu: goede verbinding tussen handset en basis
Knipperend: slechte verbinding tussen handset en basis
Geven aan dat er meer submenu’s zijn
Installatie
Steek het kleine stekkertje van de netadapter in de aansluiting(35) aan de onderzijde van de basis.
• Open het batterijvak(16) door het deksel(17) naar beneden te schuiven.
• Plaats de twee meegeleverde oplaadbare NiMH-batterijen 1,2V 650mAh, type AAA. Let op de
richting van de + en – polen (aangegeven in het batterijvak(16)). Sluit het batterijvak(16).
• Steek de netadapter in een normaal stopcontact 230V~50Hz.
• Steek het kleine stekkertje aan het telefoonsnoer in de aansluiting(36) aan de onderzijde van de
basis.
• Steek de telefoonstekker in de telefoonaansluiting op de muur.
• Plaats de handset op de basis en laat de batterijen voor het eerste gebruik minstens 14 uur
opladen. De rode indicatie-LED (25) brandt constant.
WAARSCHUWING!
• Gebruik uitsluitend de netadapter die bij de RX6031 wordt geleverd. Een onjuiste polariteit en/of
onjuist voltage kunnen de telefoon ernstig beschadigen. Adapter ingang 230V~50Hz uitgang
6V 350mA.
• Als u verkeerde batterijen in de handset plaatst, kunnen deze exploderen of lekken. Gebruik
uitsluitend oplaadbare batterijen van hetzelfde type als meegeleverd bij de RX6031 (type AAA,
NiMH, 1.2V 650mAh).
De handset opladen
• Als het
-teken op het display(2) nog maar één of geen balkjes meer bevat, moeten de batte-
rijen opgeladen worden.
• Plaats de handset op de basis. De rode indicatie-LED
(25) brandt constant als de handset op
de basis staat.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ranex RX6031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ranex RX6031 in the language / languages: Dutch as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info