685851
16
Zoom out
Zoom in
Previous page
1/18
Next page
Frequently Asked Questions
Problem Possible Cause Possible Solution
Display shows a program
is active, but system isnt
watering.
Water source not supplying water. Verify there is no disruption to the main water line and
that all other water supply lines are open and functioning
properly.
Wiring is loose or not properly
connected.
Check that eld wiring and master valve or pump start
relay wiring is securely connected at the controller and in
the eld.
Field wires are corroded or
damaged.
Check eld wiring for damage and replace if necessary.
Check wiring connections and replace with watertight
splice connectors if needed.
Loss of AC power. When there is a power loss and a 9 volt battery is
installed, the system does not irrigate but programs show
as remaining active.
NO AC message on
display.
No Power detected. Check circuit breaker and that unit is plugged into socket
or properly connected to power source.
Controller may be plugged into a
GFI outlet or an outlet that is wired
to a GFI outlet.
Check power to the outlet or reset the circuit breaker.
Programmed schedules
do not start.
Connected rain sensor may be
activated.
Set Rain Sensor to BYPASS to ignore the rain sensor. If
watering resumes, the sensor is operating properly and
no further correction is needed.
Connected rain sensor may not be
operating properly.
Let the rain sensor dry out, or disconnect it from the
controller terminal strip and replace it with a jumper wire
connecting the two SENS terminals, or set to Bypass.
If no rain sensor is connected, the
jumper wire connecting the two
SENS terminals on the terminal
strip may be missing or damaged.
Move dial position to Sensor Bypass and set to Bypass.
It just rained and
the alarm light is not
illuminated, why?
This is normal operation. The
ESP-Me does not consider the
interruption of irrigation due to
rainfall an alarm condition.
This is normal operation.
13
13
Troubleshooting
ESP-Me User Manual
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RAINBIRD ESP-Me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RAINBIRD ESP-Me in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info