500589
3
Zoom out
Zoom in
Previous page
1/26
Next page
3
Installation and Operation Manual
IMPORTANT!
Before starting work the installer should carefully read this Installation & Operation Manual,
and make sure all instructions contained therein are understood and observed.
- The thermostat should be mounted, operated and maintained by specially trained personnel
only. Personnel in the course of training are only allowed to handle the product under the
supervision of an experienced fitter. Subject to observation of the above terms, the
manufacture shall assume the liability for the equipment as provided by legal stipulations.
- All instructions in this Installation & Operation manual should be observed when working
with the controller. Any other application shall not comply with the regulations. The
manufacturer shall not be liable in case of incompetent use of the control. Any modifications
and amendments are not allowed for safety reasons. The maintenance may be performed by
service shops approved by the manufacturer only.
- The functionality of the controller depends on the model and equipment. This installation
leaflet is part of the product and has to be obtained.
APPLICATION
- The UFH thermostat is developed to control and manage actuators mounting on the
manifold.
- The thermostat is normally used in conjunction with a complete connecting box “UFH-
MASTER” with or without “Heating & Cooling module” to connect all electrical & hydraulic
components of the installation like a circulation pump, actuators...
- The controllers have been designed for use in residential rooms, office spaces and
industrial facilities.
Verify that the installation complies with existing regulations before operation to ensure
proper use of the installation.
SAFETY INSTRUCTIONS
Before starting work disconnect power supply!
- All installation and wiring work related to the controller must be carried out only when de-
energized. The appliance should be connected and commissioned by qualified personnel
only. Make sure to adhere to valid safety regulations.
- The connecting boxes are neither splash- nor drip-proof. Therefore, they must be mounted
at a dry place.
- Do not interchange the connections of the sensors, actuators and the 24V connections
under any circumstances!
Interchanging these connections may result in life endangering electrical hazards or the
destruction of the appliance and the connected sensors and other appliances.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radson Master 6 zones 24VAC for NC actuators at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radson Master 6 zones 24VAC for NC actuators in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info