569999
29
Zoom out
Zoom in
Previous page
1/68
Next page
Operation
29
3. When the scanner finds an
active frequency, it stops
searching and displays the
frequency’s number. To store
the displayed frequency in the
lowest available channel,
press PGM then ENT.The
channel and frequency flash
twice, and the scanner stores
the displayed frequency. The
scanner continues to search
for frequencies.
Ô
Or, to store the displayed
frequency in a channel you
select, press PGM,usethe
number keys to enter the
channel number you want to
use to store the frequency,
then press PGM again. The
channel number flashes.
If a channel number you
entered is already
programmed with a
frequency, the channel
number and the programmed
frequency appear for about 2
seconds. Then the channel
number flashes and the new
frequency appears.
Press ENT to program the
new frequency, or press CL/
MON to cancel. If you press
ENT, the channel and
frequency flash twice and the
scanner stores the displayed
frequency. The scanner then
continues to search for
frequencies.
4. To store the displayed
frequency in a monitor
memory, press MON/CL.
, the monitor memory
Ô NOTE Ô
•Tostartfroma
frequency already
stored in one of your
scanner’s channels,
press MAN, enter
the desired channel
number, then press
MAN again.
To reverse the
search direction at
any time, hold down
or for about 1
second.
Tosearchupor
down the selected
bandinsmall
increments (5 or
12.5 kHz steps),
repeatedly press
or .
To pause the
search, press or
. To resume, hold
down or .
To quickly move up
or down through
frequencies, hold
down or .The
scanner scans all
frequencies until
or is released.
If there is no empty
channel, Ch-FULL
appears after you
press PGM.To
store more
frequencies, clear
somechannels.See
“Clearing a Stored
Channel” on
Page 32. To
continue searching
after Ch-FULL
appears, hold down
or .Toremain
on the frequency
after Ch-FULL
appears, press
MON/CL. Ch-FULL
disappears.
M
29

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-89 - 200 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-89 - 200 Channel in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info