569963
28
Zoom out
Zoom in
Previous page
1/32
Next page
28
Troubleshooting
ˆ
Troubleshooting
If your scanner stops operating properly, these suggestions might help you eliminate the
problem. If the scanner still does not operate properly, take it to your local RadioShack store for
assistance.
RESETTING/INITIALIZING
THE SCANNER
If the scanner's display locks up or does not
work properly after you connect a power
source, you might need to reset or initialize
the scanner.
Important
: If you have problems, first try to
reset the scanner. If that does not work, you
can initialize the scanner; however, this
clears all information stored in your
scanner's memory.
Resetting the Scanner
1. Turn off the scanner, then turn it on
again.
2. Insert a pointed object, such as a
straightened paper clip, into the reset
opening on the back of the scanner (as
shown) and gently press then release
the reset button inside the opening.
If
the scanner still does not work properly,
you might need to initialize the scanner.
PROBLEM SUGGESTION
Scanner is on, but will not scan. Be sure
SQUELCH
is adjusted properly. See “Turning On the
Scanner/Setting Volume and Squelch” on Page 14.
Be sure
MAN
is not displayed. If it is, press
SCAN
.
Scanner receives stations poorly or
not at all.
Check the antenna (indoor or outdoor).
Signals may be blocked from being received by the scanner due
to metal frames or material in the building. Change
the scanner’s location and try again.
The scanner’s keys do not work, or
the display shows random segments.
The scanner might be locked. Reset the scanner. If that does
not work, reinitialize the scanner. See “Resetting/Initializing the
Scanner.”
Scanner does not work at all. Check that the power supply (AC adapter/AC outlet) is working.
The scanner might be locked. Reset the scanner. If that does
not work, reinitialize the scanner. See “Resetting/Initializing the
Scanner.”
Scanner locks on frequencies that
have an unclear transmission.
Be sure
SQUELCH
is adjusted properly.
Be sure birdie frequencies are not programmed, or listen to
birdie frequencies manually. See “Birdie Frequencies” on
Page 22.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack 200-Channel VHF-AIR-UHF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack 200-Channel VHF-AIR-UHF in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info