569963

RadioShack 200-Channel VHF-AIR-UHF Manual

3
Zoom out
Zoom in
Previous page
1/32
Next page
3
Introduction
Dual Conversion
— helps prevent
interference from image frequencies.
Your scanner receives these frequencies
(MHz):
FCC NOTICE
Your scanner might cause TV or radio
interference even when it is operating
properly. To determine whether your scanner
is causing the interference, turn off your
scanner. If the interference goes away, your
scanner is causing it. Try to eliminate the
interference by:
• moving your scanner away from the
receiver
• connecting your scanner to an outlet
that is on a different electrical circuit
from the receiver
• contacting your local RadioShack store
for help
If you cannot eliminate the interference, the
FCC requires that you stop using your
scanner.
This device complies with Part 15 of the
FCC
Rules
. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
SCANNING LEGALLY
Your scanner covers frequencies used by
many different groups including police and
fire departments, ambulance services,
government agencies, private companies,
amateur radio services, military operations,
pager services, and wireline (telephone and
telegraph) service providers. It is legal to
listen to almost every transmission your
scanner can receive. However, there are
some transmissions you should never
intentionally listen to. These include:
• telephone conversations (cellular,
cordless, or other private means of
telephone signal transmission)
• pager transmissions
• any scrambled or encrypted
transmissions
According to the
Electronic Communications
Privacy Act
(ECPA), you are subject to fines
and possible imprisonment for intentionally
listening to, using, or divulging the contents
of such a transmission unless you have the
consent of a party to the communication
(unless such activity is otherwise illegal).
29–30 10m Amateur Radio
30–50 VHF Lo
50–54 6 m Amateur Radio
108–136.9875 Air
137–144 Government
144–148 2 m Amateur Radio
148–174 VHF Hi
380–420 Government
420–450 70 cm Amateur Radio
450–470 UHF Lo
470–512 UHF “T” Band
The lightning symbol is intended to alert you
to the presence of uninsulated dangerous
voltage within this product’s enclosure that
might be of sufficient magnitude to consti-
tute a risk of electric shock. Do not open the
product’s case.
The exclamation symbol is intended to in-
form you that important operating and
maintenance instructions are included in
the literature accompanying this product.
!
WARNING:
To reduce the risk the of fire or
shock hazard, do not expose this product to rain or
moisture.
..
CAUTION
..
!
CAUTION:
TO REDUCE THE
RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE COVER OR
BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack 200-Channel VHF-AIR-UHF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack 200-Channel VHF-AIR-UHF in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info