1. Open de klep aan de achterkant van de afstandbediening en plaats
de 2 type AAA batterijen (let op de polariteit). Sluit de klep terug.
2. Open de klep aan de onderkant van de vitruele muur door de knop
zodanig te draaien dat het rechte stuk gelijk komt met de opening van
de klep. Plaats de 2 batterijen type D in het compartiment (let op de
polariteit). Sluit de klep terug.
Schakelaar bovenop de virtuele muur:
uitschakelen: in deze stand staat de virtuele muur
uit.
Laag: virtuele muur van 4m.
Middel: virtuele muur van 6m.
Hoog: virtuele muur van 8m.
3. Plaats het laadstation tegen een muur en sluit de adapter aan. Zorg
voor een vrije ruimte aan de zijkanten van het laadstation van mini-
mum 50 cm en minimum 3m aan de voorkant. Plaats daarna het toestel
tegen het laadstation of steek de DC plug rechtstreeks in de stofzuiger
(boven de “ON/OFF” schakelaar) en laat het toestel laden tot de bat-
terij vol is. (5 à 6 uur)
4. Druk op de “ON/OFF” schakelaar van het toestel.
5. Druk op de “start” toets van het toestel of de afstandsbediening en
het toestel zal in de automatische modus beginnen met stofzuigen.
Voor meer en gedetailleerde informatie, gelieve de handleiding te
raadplegen !!!
SNELGIDS VOOR RVC3N ROBOTSTOFZUIGER
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Quigg RVC3N at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Quigg RVC3N in the language / languages: Dutch as an attachment in your email.
The manual is 0,39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
