Manual Quick mill QM67 Dual Boiler (page 17 of 24) (English)

635669

Zoom out

Zoom in

1/24

QM67 Dual Boiler Espresso Machine

Owner’s Manual Page 16

Maintenance – Continued

Group Gasket And Shower Screen Replacement

• The group gasket is a black rubber gasket that makes the seal between the portafilter

and the group head. We recommend replacing the gasket on a yearly basis. The QM67

uses an E61 8.5mm gasket. They can be purchased from our website at the link below.

http://www.chriscoffee.com/products/home/e61groupparts/e61groupgasket

• Replacing the group gasket requires the removal of the shower screen as well so we also

recommend replacing the shower screen at the same time. The E61 shower screen can

be purchased from our website at the link below.

http://www.chriscoffee.com/products/home/e61groupparts/faemae61groupscreen

• Before replacing the group gasket and shower screen the machine should be turned off

and cooled down so that the grouphead is cool to the touch.

Gasket and Screen Removal

• There are two ways to remove the group gasket and shower screen depending on how

old they are. If you replace the gasket yearly then the first method shown is

recommended. If the gasket is older and dried out then the second method shown will be

necessary.

• Method 1

In the picture to the right shows an indent that

goes around the perimeter of the screen.

Insert either a flat blade screwdriver or a spoon

into the indent and then carefully pry the gasket

and screen down. You may have to do this on a

few different spots to remove it.

Shown Outside Of Machine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quick mill QM67 Dual Boiler in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quick mill QM67 Dual Boiler Manual

Product: