698713

Quadral Subwoofer Manual

4
Zoom out
Zoom in
Previous page
1/21
Next page
6
ENGLISH
7
Connection variant no. 2
(Subwoofer in a preamp/output amp combination)
If your system consists of a preamp/power amp combination you can, connect the subwoofer
to the preamp’s output by means of a cinch cable. To do this, use the cinch sockets marked
„LOW LEVEL IN/LINE“. Also using a cinch cable, connect up your output amp to the subwoof-
er at the cinch socket „LOW LEVEL OUT“. If your preamp has 2 pairs of output sockets you
can leave the direct connection between preamp and output amp as it is and simply connect
the subwoofer to the preamp’s second cinch output; there is then no need for the subwoofer
to be connected to the power amp. In these case there is no need to use loudspeaker cables
for the connections. Put your subwoofer into operation as described under „Starting up“.
Connection variant no. 3
(Subwoofer in a surround system)
If your surround amp or receiver has a subwoofer line output (Sub Pre-Out), you can use this
by connecting the subwoofer to this socket by means of cinch cable (Connection variant no.
4a or 4b). If your surround amp does not have an output of this type you will have to connect
up the subwoofer as described under „Connection variant no. 1“.
Having connected up your subwoofer at the subwoofer line output of your digital surround
sound amplifier, you must now configure the amplifier's bass management as follows:
Subwoofer: yes
Front, center, rear: large /small (depending on size)
In these case there is no need to use loudspeaker cables for the connections. Put your sub-
woofer into operation as described under „Starting up“.
Connecting up
Please connect the device using the network cable supplied to the mains socket shown below.
Before connecting up the subwoofer to your hi-fi or surround system, make sure that the unit
and all system components are switched off, i.e. the pilot lights should all be off.
Connection variant no. 1
(Additional woofer for an existing hi-fi system)
Connect the subwoofer to your amplifier at the „B“ loudspeaker outputs. The connections of
the existing speakers remain unchanged. Having connected the subwoofer, you must then
activate the „B“ loudspeaker outputs; your amplifier’s operating manual will tell you how to
do this. Put your subwoofer into operation as described under „Starting up“.
This operating mode can only be used if you can activate the speaker outputs A & B on your
amplifier simultaneously. Please consult your amplifier's operating manual accordingly.
Connection variant no. 1
(Differences of models cause a different position of the operating elements.)
L
R
Output
Sub Pre-Out
+ RIGHT -
- LEFT +
- + - +
+ RIGHT -
- LEFT +
B
A
VERSTÄRKER
Amplifier
Pre-Amplifier
Surround-Amplifier
LoudspeakerLoudspeaker
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadral Subwoofer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadral Subwoofer in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info