698707
7
Zoom out
Zoom in
Previous page
1/11
Next page
ENGLISH
13
12
Never use the equipment in the vicinity of water, in humid areas or outdoors. Moisture can
bypass the electrical insulation and this will create a life-threatening risk as is the case with all
equipment that has not been specially designed against the penetration of moisture.
Protect the equipment against water being sprayed on it. You must also ensure that no vessels
containing liquid (e.g. vases) are placed on top of the equipment.
Do not place the equipment in the vicinity of a heat source such as an electric fire, radiator,
oven or similar.
The slits and openings in the enclosure provide the ventilation and ensure reliable operation.
They must never be misaligned or covered.
Burning-out of specific components cannot be completely excluded, despite the use of pro-
tective devices, if the equipment is severely overloaded by continually using very loud sound
levels. A fire might also be caused inside the equipment in theory, as a result of this type of
overloading. Therefore the amplifier should always be used within its limits and it should not
be left unattended.
Only our technical service should undertake the maintenance of your equipment. Maintenance
will be necessary if any type of damage occurs, i.e. if the power cables or plugs are damaged,
if an object falls on the equipment, if the equipment is dropped or if liquid seeps into it. Never
open the equipment as you might touch the mains voltage (230V / 115V), which is dangerous.
Only use furniture and other units for attaching and putting the equipment on that can be
obtained from or are recommended by the manufacturer. You must ensure that moveable tab-
letop units or shelves on which the equipment will be placed are always moved very carefully
in order to prevent damage or injuries from being caused if the equipment tips over.
Continuously loud volume can damage your hearing!
Only use a dry, soft cloth to clean your equipment.
Keep the packing for possible transportation use later on and keep the plastic bag well away
from children, due to the risk of asphyxiation.
Control elements on the M10 front panel
1 Speakers: Button for speaker switching (Sequence: Group A / B / A+B / OFF)
2 LED: Loudspeaker group display
3 Operating Display: This display will light up blue, when the device is turned on and in
operation
4 On/Off Button: Press this button to turn the M10 on. Press this button again to switch the
device off (standby). During standby operation, all of the settings remain saved.
5 Standby Display: This display is blue whenever the unit is in standby mode and this indicates
that the unit can be switched on again at any time using either the remote control or button
(4) .
Note:
If this display will flash the protection circuit turn off speaker in case of failure or overload.
Reset will be possible if you operate power switch (9) located at back panel again.
1 432 5
M10
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quadral AURUM M10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quadral AURUM M10 in the language / languages: English, German as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info