779021
5
Zoom out
Zoom in
Previous page
1/8
Next page
178.843, 178.846 User Manual
Power Up
Turn the VOLUME, ECHO and MIC VOLUME controls down (anti-clockwise) and turn the
POWER switch on (the power LED should light).
BASS and TREBLE controls should remain pointing vertically (12-o-clock position).
Switch VCV (voice controlled volume) off.
Your QR-series PA unit should now be ready to operate.
VHF Wireless Microphones
For QR12PA and QR15PA, insert the supplied 9V batteries into the handheld microphones by
carefully unscrewing the base of each and connecting the “+” and “- terminals or the battery
to the corresponding clips inside the microphone body, taking care to observe the correct
polarity.
For QR10PA, connect the neckband microphone to the bodypack, slide open the bodypack and
insert the supplied 9V battery, again observing the correct polarity.
Connect the antennae to the connectors at the rear and extend them fully at an angle.
With the VOL A and VOL B controls turned down, press the VHF ON/OFF button in so that the
VHF POWER LED lights.
Switch on each wireless mic in turn the RF LEDs should light as a result.
If the LED on the transmitter lights dimly, change the battery.
Gradually increase VOL controls, testing each microphone in turn for output through the
speaker.
Take care not to incur “feedback” (howling or screeching sound through the speaker) by
keeping the microphone a sensible distance from the speaker and pointing away from the
speaker so that it doesn’t
“hear”
the speaker output.
Turning the ECHO control clockwise introduces a pre-set echo function for singing and special
effects. BASS and TREBLE can be cut by turning anti-clockwise or boosted by turning
clockwise.
When not in use, switch the wireless microphones off.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for QTX 178.843 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of QTX 178.843 in the language / languages: English as an attachment in your email.

The manual is 0.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info