758015
1
Zoom out
Zoom in
Previous page
1/4
Next page
Wi-Fi Smart Plug
Quick setup manual
Wi-Fi Prise intelligente
Guide de démarrage rapide
Wi-Fi Intelligenter Netzstecker
Kurzanleitung
Wi-Fi Slimme stekker
Verkorte handleiding
EN FR DE NL
Description
1. On/off button
2. Reset button
3. On off indicator
4. Connection status indicator
Before you start
The functionality of WiFi connected product depends
on the stablity of your home network. We are not
responsible for the stability and capability of your private
network, and therefore the optimal functionality of
our products. If any questions about your private WiFi
network, contact your WiFi providor.
We are continuously improving and updating our
products and product information. It’s therefore possible
that there is a slight difference between the description
in this manual to the operation of the product. If
something is different or not clear, always check our
website for the most current manual
Use
1. Download and install the app qnect home“ from Apple
App Store or Google Play Store on your mobile device.
2. Launch the app “qnect home.
3. Create a new account or log in to your existing account.
4. Plug in the smart power plug.
5. Tap “+” to add the device.
When bluetooth is enabled on your smartphone the
app will nd the device itself. Follow the installation
steps within the app.
When bluetooth is not enabled, follow below steps.
6. Select Comfort > QN-WP01 from the list of products.
If the status indicator does not ash: Press and hold the
reset button for 6 seconds until the light ashes quickly.
If the light ashes: Conrm in the app.
7. Confrm the Wi-Fi network and password.
8. Enter the device name.
Note: The device name will also be used by Amazon Alexa
and Google Home.
Description
1. Bouton marche/arrêt
2. Bouton de réinitialisation
3. Indicateur marche/arrêt
4. Indicateur de statut de connexion
Avant de commencer
La fonctionnalité du produit connecté WiFi dépend de la
stabilité de votre réseau domestique. Nous ne sommes
pas responsables de la stabilité et des capacités de votre
réseau privé, et donc de la fonctionnalité optimale de nos
produits. Si vous avez des questions sur votre réseau
WiFi privé, contactez votre fournisseur WiFi.
Nous améliorons et mettons à jour constamment nos
produits et nos informations sur les produits. Il est
donc possible qu’il y ait une légère différence entre la
description de ce manuel et le fonctionnement du produit.
Si quelque chose est différent ou pas clair, consultez
toujours notre site Web pour le manuel le plus récent
Usage
1. Téléchargez et installez l’appli qnect home” sur Apple
App Store ou Google Play Store dans votre mobile.
2. Lancez l’appli “qnect home”.
3. Créez un nouveau compte ou connectez-vous à votre
compte existant.
4. Enchez la prise électrique intelligente.
5. Touchez “+” pour ajouter l’appareil.
Lorsque le Bluetooth est activé sur votre smartphone,
l’application trouvera l’appareil lui-même. Suivez les
étapes d’installation dans l’application.
Lorsque le Bluetooth n’est pas activé, suivez les étapes
ci-dessous
6. Sélectionnez Confort > QN-WP01 dans la liste des
produits.
Si l’indicateur d’état ne clignote pas: Appuyez sur le
bouton de réinitialisation et maintenez-le enfoncé
pendant 6 secondes jusqu’à ce que le voyant clignote
rapidement.
Si la lampe clignote : Conrmez l’app.
7. Conrmez le réseau Wi-Fi et le mot de passe.
8. Saisissez le nom d’appareil.
Remarque : Le nom de l’appareil est aussi utilisé par
Amazon Alexa et Google Home.
Beschreibung
1. Ein/Aus-Taste
2. Reset-Taste
3. Ein-/Aus-Anzeige
4. Verbindungsstatusanzeige
Bevor du anfängst
Die Funktionalität eines Produkts mit WiFi-Verbindung
hängt von der Stabilität Ihres Heimnetzwerks ab.
Wir sind nicht verantwortlich für die Stabilität und
Leistungsfähigkeit Ihres privaten Netzwerks und damit
für die optimale Funktionalität unserer Produkte. Wenn
Sie Fragen zu Ihrem privaten WLAN-Netzwerk haben,
wenden Sie sich an Ihren WLAN-Anbieter.
Wir verbessern und aktualisieren ständig unsere
Produkte und Produktinformationen. Es ist daher
möglich, dass zwischen der Beschreibung in diesem
Handbuch und der Bedienung des Produkts ein
geringfügiger Unterschied besteht. Wenn etwas anders
oder nicht klar ist, nden Sie auf unserer Website immer
das aktuellste Handbuch
Gebrauch
1. Laden Sie die App “qnect home vom Apple App Store
oder Google Play Store auf Ihr Mobilgerät herunter und
installieren Sie sie.
2. Starten Sie die App qnect home”.
3. Erstellen Sie ein neues Konto oder melden Sie sich bei
Ihrem bestehenden Konto an.
4. Stecken Sie den intelligenten Netzstecker ein.
5. Tippen Sie auf “+”, um das Gerät hinzuzufügen.
Wenn Bluetooth auf Ihrem Smartphone aktiviert ist,
ndet die App das Gerät selbst. Befolgen Sie die
Installationsschritte in der App.
Wenn Bluetooth nicht aktiviert ist, führen Sie die
folgenden Schritte aus.
6. Wählen Sie Komfort > QN-WP01 aus der Produktliste.
Wenn die Statusanzeige nicht blinkt: Halten Sie die
Reset-Taste 6 Sekunden lang gedrückt, bis die Anzeige
schnell blinkt.
Wenn das Licht blinkt: Bestätigen Sie in der App.
7. Bestätigen Sie das Wi-Fi-Netzwerk und das Passwort.
8. Geben Sie den Gerätenamen ein.
Hinweis: Der Gerätename wird auch von Amazon Alexa
und Google Home verwendet.
Beschrijving
1. Aan/uit-knop
2. Resetknop
3. Aan/uit-indicator
4. Verbindingsstatusindicator
Voordat je start
De functionaliteit van een met wi verbonden product
hangt af van de stabiliteit van uw thuisnetwerk. Wij zijn
niet verantwoordelijk voor de stabiliteit en mogelijkheden
van uw privé-netwerk, en dus voor de optimale
functionaliteit van onze producten. Neem bij vragen over
uw eigen wi-netwerk contact op met uw wi-provider.
We verbeteren en updaten voortdurend onze producten
en productinformatie. Het is daarom mogelijk dat er
een klein verschil is tussen de beschrijving in deze
handleiding en de bediening van het product. Mocht er
iets anders zijn of niet duidelijk zijn, kijk dan altijd op onze
website voor de meest actuele handleiding
Gebruik
1. Download en installeer de qnect home” app uit de
Apple App Store of Google Play Store op uw mobiele
apparaat.
2. Activeer de qnect home” app.
3. Maak een nieuw account aan of log in op uw bestaande
account.
4. Stop de slimme stekker in een stopcontact
5. Druk op “+” om het apparaat toe te voegen.
Wanneer bluetooth is ingeschakeld op je smartphone,
zal de app het apparaat zelf vinden. Volg de
installatiestappen binnen de app.
Volg onderstaande stappen als Bluetooth niet is
ingeschakeld.
6. Selecteer Comfort > QN-WP01 uit de productenlijst
7. Stop de slimme stekker in een stopcontact
Als de statusindicator niet knippert: Houd de resetknop 6
seconden ingedrukt totdat het lampje snel knippert.
Als de lamp knippert: Bevestig in de app.
8. Bevestig het wi-netwerk en het wachtwoord.
9. Voer de naam van het apparaat in.
Opmerking: De naam van het apparaat zal ook door
Amazon Alexa en Google Home worden gebruikt.
Art. 414000015
QN-WP01 RESET
>6s
Input voltage 100 - 240 VAC
[50/60Hz]
Power plug Schuko Type F (CEE)
Max. power output 3600W - 16A
Frequency range 2400 - 2482.5
MHz
Antenna gain : 3dBi
Max. radio transmit power 20 dBm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qnect QN-WP01 - 414000015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qnect QN-WP01 - 414000015 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info