800209

QLT Compressor-pump Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
TWO POWER SUPPLY OPTIONS
1. Wireless: fully charge the device by using cable.
2. Wired: connects to a usb outlet to provide power directly, not to charge.
3. Use the appropriate adapter to inate your desired object. (various adapters included)
4. You can turn the lights on and off by pressing the “U” button when the power is on.
INSTRUCTIONS
For car, motorbike, electric vehicles, bicycles.
Long press the button to turn on the air compressor. Check if the air pressure value
is zero, conrm if the set value is a reasonable air pressure value for the inatable object,
otherwise reduce the set air pressure value. screw the nozzle into the air hole of the air
pump and put the appropriate adapter on it. Start inating, the inating stops automatically
when it reaches the set value.
INSTRUCTIONS
For inating balls, rubber rings, air mattresses and other inatable items.
Long press the button to turn on the air compressor. Check if the air pressure value
is zero, conrm if the set value is a reasonable air pressure value for the inatable object,
otherwise reduce the set air pressure value. screw the nozzle into the air hole of the air
pump and put the appropriate adapter on it. Start inating, the inating stops automatically
when it reaches the set value.
TOLERANCE
Pressure tolerance exists with all available air pumps in the market
This tolerance can be caused by :
1. weather temperature
2. tightness of air belt and attachment connection
Occurring problem
set 2.0 Bar, stop at 1.7 Bar
Solution
INSTRUCTIONS FOR OPERATING THE AIR COMPRESSOR/PUMP
set 2.3 Bar, or connect tyre and valve properly
NOTES
1. Keep children and animals away from this air pump! This pump is not a toy. Therefore,
never leave the pump alone in the presence of children or animals.
2. Never use this air pump near ammable or explosive liquids and gases (especially the
petrol station!).
3. Do not leave while operating the air pump (inating).
4. it is normal for the device to become hot, Use the pump for about 8 - 10 minutes max, then
stop for about 10 minutes and you can use it again after these 10 minutes.
5. In case of abnormal noise or excessive temperature during ination, immediately switch
off the unit and let it cool down for at least 15 minutes. See for yourself what the problem
could be. Please be careful to avoid accidents as the machine may still be hot.
6. If the air pump is not used for a long time, store it in a dry and closed place. If you have
stored it for a long time, it is recommended to charge the battery once every three months.
7. Before using the air pump, make sure it has sufcient capacity for the rst time you use it.
Therefore, we recommend charging it for at least 4 hours.
8. Charge the product for 2-3 hours before using it for the rst time. Please charge when
the device is turned on, the indicator with turn from red to green, which means it is fully
charged.
High denition display of tire pressure value
Long press to reduce tire pressure
Long press to increase tire pressure
Long press switch light
Short press to switch light
Short press start ination pump
Long press shutdown
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for QLT Compressor-pump at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of QLT Compressor-pump in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info