600485
1
Zoom out
Zoom in
Previous page
1/4
Next page
Dark WL III PIR LED Solar
MODEL: 90502
HOW TO DETERMINE WHERE TO MOUNT YOUR SOLAR
PIR SENSOR LIGHT
Please be noted that: DIRECT SUNLIGHT is important for the opera-
on of SOLAR PIR SENSOR LIGHT. The more direct sunlight the solar
cell receives in dayme, the longer the light will operate.
Main Unit:
The main unit contains the lamp (2pcs 0.5W LED), moon sensor and
baery (NI-MH Rechargeable baery, 3.6V, 600mAh). When determi-
ning where to mount this unit, please consider that the moon
sensor with detecon scope of max. 8 meters (in front of the light)
and about 120º (horizontal) at 25 environmental temperature. The
detecon range of the unit may alter with temperature change, the
mounng height and locaon. All Passive Infra-Red detectors are
more sensive in cold and dry weather than warm and humid
weather.
To mount the unit vercally as a security light, aach the unit to a
solid surface as shown in figure . Use the two screws provided in the
package.
Solar Cell:
The solar cell is one of the main power source for the SOLAR PIR
SNESOR LIGHT. It converts the sunlights energy into electricity that
charges the baery in main unit. It requires DIRECT SUNLIGHT onto
the surface of solar cell for as long as possible during the dayme.
Use the two screws provided in the package to mount the solar cell
unit onto a solid surface. Make sure it is fixed into the solid surface.
You can adjust the angle of the solar cell. It should face as much
DIRECT SUNLIGHT as possible during the dayme.
At last route the solar cell’s power cord to the main unit and plug it
into the the side hole for solar cell.
FINAL ADJUSTMENT AND START-UP
Aer you successfully installed your SOLAR PIR SENSOR LIGHT, you
are almost ready for carefree operaon with a few final steps:
Inial 2-days Charge:
On the main unit there is a switch with 2 posions:
OFF ON
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qazqa 90502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qazqa 90502 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info