600482
1
Zoom out
Zoom in
Previous page
1/2
Next page
Motion V CL 14W LED PIR
MODEL: 90498
We are delighted that you have purchased this MICROWAVE lamp.
This lamp is suitable for indoor use only. Please read this instrucon
manual before installaon and retain for future reference.
IMPORTANT: Never modify the unit, there are no user serviceable
parts inside. Not suitable for use with dimmer switches. Install in
accordance with IEC Wiring Regulaons.
THE LIGHT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.
HAVE YOUR LIGHT WORK WELL
To achieve the best results, take the following points into account:
1. The sensor will reach the opmum performance when mounted
at a height of more than 2.5 meters
2. Avoid poinng at or posioning close to heat sources such as
heaters or heat extracon units otherwise it may falsely trigger off
the light.
3. Avoid poinng at bright lights as the PIR sensor will not funcon
when you set Lux control level to dark ( posion).
4. Avoid mounng at a strong electromagnec disturbance, i.e. near
electrical motor or fluorescent lamp ballast.
INSTALLATION(See Figure )
Before commencing any electrical work, ensure the mains supply
cables have been isolated by switching off and removing the relevant
fuse.
1. Open the lamp cover
2. Unscrew the Terminal Block Cover Screw then remove the Termi-
nal Block Cover
3. Connecng the Power Cable (H05RN-F 3G 1mm², not included) to
the Terminal Block, see the relave symbol. Ensure the cable must
pass through the Cable Gasket.
4. Refit the Terminal Block Cover
5. Use the Main body to mark the posion of screw holes onto
mounng surface. Drill the wall to depth of about 30 mm and fit
the plasc plugs, and then fix the Cover to the mounng surface
with rightly screws. Be careful to avoid drilling or screwing into
concealed electrical wiring.
6. Refit the lamp cover
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qazqa 90498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qazqa 90498 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info