584539
2
Zoom out
Zoom in
Previous page
1/2
Next page
INTRODUCTION
Thank you for purchasing Pure Acoustics’products, and welcome to the Pure Acoustics family
of satisfied customers! Pure Acoustics was established to fulfill the need for high quality
speakers of exceptional design at an affordable price. After years of research and develop-
ment, and by manufacturing all parts ourselves – from the voice-coil to the uniquely-designed
crossover – Pure Acoustics is able to offer you speakers of superior value.
Each speaker component has been designed and engineered with first-rate materials to pro-
duce exceptional sound. Our speakers offer the best of it all – high-quality sound, hand-made
solid construction, and a remarkably stylish appearance. We welcome you to witness the
results. Our teams dedication to quality, reliability and attractive design has created some of
the best-value speakers you can find today.
Unpacking
Carefully remove your new Pure Acoustics speakers from the box. Inspect the speakers for
transit damage. If you discover damage, please contact your dealer immediately. Save your
carton, its the best possible protection for your speakers should you ever need to move them.
Connecting Wires and Receiver
Reading this and your amplifier’s owner manual fully will help you to set up your speaker
properly and reward you with a fine listening experience.
WARNING for U.S.Customers In some cases, Pure
Acoustics models may contain two pairs of binding post
wire terminals. Per Diagram A, it is important that U.S.
customers do not remove the jumper links which are
attached between the positive and negative terminals.
Removing these connectors, and/or wiring more than
one left and one right wire into your speaker will lower impedance and can damage your
equipment. If your speaker contains these terminals, only connect wires to top positive and
negative terminals, not to the bottom terminals.For further information, please contact 718-
788-4411 for technical support.
Make sure all equipment is turned off. When connecting the speakers, be certain to retain
the correct polarity. Most speaker wire is polarity coded either by color or texture.This means
that each conductor is labeled either (+) positive or (–) negative. In the back of your amplifier,
each channel is labeled (+) and (–) as well. You must ensure that you connect (+) to (+) and
(–) to (–).
Warning: If you connect the speaker wires out of phase,meaning (+) to (–) or (–) to
(+), this will dramatically
reduce bass response and
change the tonal charac-
teristics of the speaker.
Also, if wires
are loose, it
can cause
crackling,
static types
of sounds, and/or
short circuit
your equipment.
Diagram A
Connect wires to top terminals only
Speaker Positioning
The diagram below shows 5.1, 6.1, and 7.1 speaker system placement.
The front center-channel
speaker should be placed as
close to the TV as possible,
preferably directly above or
below the set. The front chan-
nel speakers should be placed
at least 6 feet apart (TV/moni-
tor center) to create proper
stereo imaging. The 5.1 sur-
round speakers should be
equally spaced to the side of
the listener. The rear-center
speaker should be positioned
directly behind the listening
area.The rear channel speakers
should be positioned behind
and slightly to the sides of the
viewer/listener. It may take
some experimentation with
different locations for the sur-
round speakers to suit your
preference and your room.
Running Time
and Cleaning
The performance of the speakers may change during the initial use due to storage and
mechanical limitations. Please allow 15 hours of use for the temperature effect and mechan-
ical parts to attain their intended design characteristics.
Make sure to turn all equipment off before cleaning. The cabinet only requires occasional
dusting. Please avoid touching the drive units.
Troubleshooting, Service, and Limited Warranty
Pure Acoustics products have been designed and manufactured to the highest quality stan-
dards. If you experience a problem, first try to determine if it is indeed a speaker issue.
Determine whether the problem exists in both speakers. If it does, the problem likely origi-
nates in some other component in the system. If the problem is in one speaker only, reverse
your speaker leads (left to right, right to left). If the problem moves to the other channel,your
pr
oblem is not in the speakers.
I
f y
ou ha
ve determined you have a speaker problem, please contact your dealer or Pure
Acoustics Customer Service at 718-788-4411. Warranty is only valid for the original owner
and is limited to the repair of the product for manufacturer defects, either in materials or
workmanship. Warranty does not apply to units that were subject to misuse, neglect, abuse,
alteration, or improper installation. Warranty does not cover damage due to fire, water, heat,
lightning, or any other cause beyond the control of Pure Acoustics. All warranty repairs must
b
e acc
ompanied b
y the or
iginal bill of sale
.
No other document is acceptable or required.
Front left & right
Center
Left surround
(5.1)
Rear left
(Add for 7.1)
Optional
subwoofer
right or
left side
Right surround
(5.1)
Rear Center
(Add for 6.1)
Rear right
(Add for 7.1)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Acoustics Super Nova 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Acoustics Super Nova 8 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info