593625
1
Zoom out
Zoom in
Previous page
1/2
Next page
INSTRUCTIONS
DIGITAL TYPE
Series PVH (Cal. W670)
FEATURES
Time/calendar
Stopwatch
Countdown timer
with preset and adjustable timer functions
Daily alarm
Auto illumination function
Illuminating light
AUTO ILLUMINATION FUNCTION
The display is usually turned off. By pressing a button to operate the watch, the light is
turned on to show the display for 2 seconds.
The display will be turned off 2 seconds after a button is pressed.
* To check the data on the display, press button E.
(See “ILLUMINATING LIGHT” below)
While the stopwatch or timer is counting, the display is illuminated every minute to signal
the lapse of time: For the first 19 minutes in the stopwatch function and for the last 19
minutes in the timer function.
ILLUMINATING LIGHT
E
Turn on the illuminating light.
The display panel is illuminated
for 3 seconds.
MODE CHANGE
With each press,
the mode changes in order.
A
Mode
mark
TIME/CALENDAR
mode
STOPWATCH
mode
TIMER mode
ALARM mode
When the confirmation sound is turned on, a beep sounds with each press of button A to
change over the mode. It sounds in a different tone when the TIME/CALENDAR mode
appears, so that you can easily know the mode shown.
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
C
Day
DateMonth
Press for 2 to 3 seconds.
B
C
Select the digits to be adjusted.
D
B
Set the flashing digits.
Return to TIME/CALENDAR mode.
D
B
“A” (AM)/
“P” (PM) mark
Selection of the digits
Seconds Minutes Hour Date
12-/24-hour indication Year Month
The calendar automatically adjusts for odd and even months including February of
leap years.
In second setting, when the seconds count any number from 30 to 59 and button
D is pressed, one minute is added and the seconds are reset to 00.
The flashing digits except the seconds and 12-/24-hour indication move quickly if
button D is kept pressed.
Once the year, month and date have been set, the day of the week is automatically set.
If the watch is left untouched with the digits flashing, it will automatically return to the
TIME/CALENDAR mode in 2 to 3 minutes.
Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons C and D are pressed at the same time. This is not a malfunction. Press any
one of the buttons to return to the TIME/CALENDAR mode, and then set the time/
calendar again.
STOPWATCH MODE
The stopwatch measures up to 10 hours in 1/100 second increments.
C
Start / Stop / Restart
D
Current time
Time measured
Reset /
Measure lap time
B
Lap time measurement
C
START
D
LAP
D
LAP
D
RESET
C
STOP
Lap No.
Lap time
MEMORY RECALL FUNCTION
B
D
The stored data can be recalled either during or after the measurement.
Press to activate the memory recall
function.
**
With each press, stored data are
recalled from the oldest to the newest.
B
Return to STOPWATCH mode.
**In memory recall after measurement, the
oldest measurement in memory is displayed.
In memory recall during measurement, the
newest measurement in memory is displayed.
D
B
Lap time measured and lap number remain displayed for 10 seconds, and then, the
current time appears in the upper row of the display.
The first 8 lap times are automatically stored in memory.
Even if the digits are reset to 00 in the stopwatch measurement, stored data is not
erased and can be recalled unless a new measurement is started.
When the button operation confirmation sound is turned on, a beep sounds every
minute to signal the lapse of time.
Even if the STOPWATCH mode is changed to another while the measurement is in
progress, it continues counting properly and the flashing STOPWATCH mode mark
indicates that the stopwatch is in use. After the stopwatch is used, however, be sure
to reset it as the battery energy is consumed enormously to shorten the battery life.
The display will be turned off 2 seconds after a button is pressed. To check the data
on the display, press button E.
12-98 Printed in Japan
NPED22
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar W670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar W670 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info