Standard measurement
s
A
s
B
START
STOP
RESET
A
Restart in the following procedure.
A
B
s
START
RESET
Accumulated elapsed time measurement
A
s
A
s
B
s
A
/
A
NOTES ON OPERATING THE WATCH
TIME SETTING
l
If the CROWN is pulled to the second position while the CHRONOGRAPH is started,
the CHRONOGRAPH hands will continue to move. This is not a malfunction.
l
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired
time and then turn it back to the exact minute.
24-HOUR SETTING
l
When the time is set, the 24-hour hand move correspondingly with the hour and
minute hands.
l
When setting the hour hand, check that the 24-hour hand is correctly set.
CALENDAR SETTING
l
It is necessary to adjust the date on the first day after a 30-day month and February.
l
Do not set the date between 9:00 P.M. and 3:00 A.M. as this will cause a malfunction.
CHRONOGRAPH
l
Restart and stop of the CHRONOGRAPH can be repeated as many times as necessary
by pressing button B.
l
When button A is pressed to start a measurement, the CHRONOGRAPH second
hand will start moving.
** Restart and stop of the CHRONOGRAPH can be repeated as many times as
necessary by pressing button A.
START
STOP/ RESTART
STOP RESET
**
* If the CHRONOGRAPH hands are incorrect, following below procedure all the
CHRONOGRAPH hands will be reset to "0" position.
s
A
s
B
A
