Manual Pulsar 940 (page 5 of 14) (English, German, French, Italian, Spanish)

572637

Zoom out

Zoom in

1/14

Remove the IR from the carrying case.

Turn the knob of the battery cover 90° counterclockwise, remove the

cover and install two AA batteries as indicated (see illustration). Close

the cover and lock.

Attach the IR illuminator to the Weaver rail (1) and tighten the locking

screw.

Switch on the IR Illuminator by pushing the “ON/OFF” button (2), the

red LED indicator (5) lights up.

To adjust the beam from spot to flood, rotate the lens holder (3) until

you get the best image through your night vision riflescope/device.

To adjust the IR power, rotate the controller (4).

After use switch off the IR by pushing the “ON/OFF” button (2) - the red

LED indicator goes out.

The housing of the flashlight can be cleaned with a soft cloth. Do not

use an abrasive cloth/chemical cleaning solutions. Always use

cleaning equipment designed for photographic equipment. Dust can

be removed from the lens with a soft brush. The lens can be cleaned

with any cloth designed for cleaning optical equipment. Do not pour

lens cleaner on the lens itself!

adjust beam from spot to flood;

smoothly adjust power depending on viewing conditions.

The IR Flashlights are equipped with a standard Weaver mount which allows

you to affix the auxiliary IR to Pulsar devices with a Weaver rail. The Pulsar-

805 is suitable for use with analog night vision riflescopes (such as the

Sentinel Gen.1, Sentinel GS, Sentinel G2+, Phantom G2+), and

monoculars (e.g. the Challenger series). The Pulsar-940 can be employed

with digital riflescopes Digisight N550 and digital monoculars (e.g. units of

the Recon series). You can also use them as hand-held units.

Note: If you need to adjust the IR spot position, turn the locking ring (6)

5-10 degrees counter-clockwise. Match the IR spot with the image

viewed through a night vision device by moving the IR lens holder (3)

transversely. Tighten the locking ring (6).

Caution! During operation rings of the radiator become hot, which is normal

and is not a defect .

Инфракрасные фонари Pulsar-805 и Pulsar-940 предназначены для

дополнительной подсветки лучами ИК диапазона (невидимыми – в Pulsar-940)

объектов наблюдения при использовании приборов ночного видения в

условиях, близких к полной темноте (отсутствие луны ночью, сильная

облачность и т.д.). Применение фонарей Pulsar позволяет:

существенно увеличить дальность наблюдения;

производить безошибочную идентификацию объекта наблюдения;

детально рассмотреть любой выбранный объект;

регулировать размер светового ИК-пятна в зависимости от

дистанции;

79071

200

0-2003

805

5,7-10

3 (2xAA)

- 20°С ...+40°С

132x45x52

140/190

 79076

200

0-2003

940

5,7-10

3 (2xAA)

- 20°С ...+40°С

132x45x52

140/190

ИК-фонарь Pulsar-805/940

Чехол

Две батареи типа АА

Переходник для установки на приборы с гнездом 1/4”

Салфетка для чистки линз

Инструкция по эксплуатации

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar 940 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pulsar 940 Manual

Product: