633382

Psiber CT 50 Cable Tool Manual

3
Zoom out
Zoom in
Previous page
1/12
Next page
4
English
5
English
TONE SCREEN
Pressing the Tone function key in the Mode Screen presents the Tone Screen
and the CableTool begins transmitting the user selected tone pattern and
frequency (see Tone Setup).
The CableTool provides four different tone
patterns which can be changed by pressing the
Up/Down cursor key. The tone frequency can
be changed by pressing the Select function key to move the arrow to the Band field
and then pressing the Up/Down cursor key to change the frequency band.
SETUP
Pressing the Setup function key in any screen presents the Setup Screen.
The Up/Down cursor key is used to display:
1) Units Setup
2) Default Cable Setup
3) Cable List Setup
4) Custom Cable Setup
5) Toner Pattern/Band Setup and
6) Power Down Setup.
Press the Select function key to enter the displayed setup screen.
UNITS SETUP
The Units Setup Screen is used to select
the units used when displaying the length
measurement in the Length screen. The Up/
Down cursor key is used to select Feet or
Meters. Press the Save function key to store the selected units.
CABLE LIST SETUP
The CableTool has a prestored list of over 60 popular cable types with the
typical NVP value for each cable. Cable List setup allows the user to store the
most often used cable types at the top of the list for quick access and to modify
the typical NVP when the actual NVP is known to be different value.
Pressing the Up/Down cursor key scrolls
between the eight storage locations. Pressing
the Select function key advances the arrow to the
Type field where any one of the prestored cable
types can be displayed by pressing the Up/Down cursor key. Pressing the Select func-
tion key again advances the arrow to the NVP field which can be modified by pressing
the Up/Down cursor key. Press the Save function key to store the information.
DEFAULT CABLE SETUP
Default Cable setup allows the user to store the most often used cable type as
the default for the Length measurement in the Length screen. The Default Cable is
used when the Length function is selected and length measurements begin.
Pressing the Up/Down cursor key scrolls
between the eight storage locations. Press the
Save function key to select the displayed cable
as the Default for length measurements.
CUSTOM CABLE SETUP
Custom Cable Setup is used to measure and store the NVP of a cable of a
known length. Connect the CableTool to a piece of cable that is between 50 and
100 feet long and is open at the far end. Cables less than 50 feet or longer than 100
feet may not give accurate NVP results.
Press the Up/Down cursor key to select one
of the four Custom Cable storage locations.
Press the Select function key to advance the
arrow to the length field and then use the Up/
Down cursor key to adjust the displayed cable length until it matches the known
length. The NVP changes as the displayed cable length is adjusted. Press the Save
function key to store the information.
TONER SETUP
The CableTool has four different tone patterns and four different tone frequen-
cies that can be used to trace a cable with a
tone probe. The frequencies and patterns are
compatible with tone probes from different
manufacturers. The different patterns and
frequencies allow multiple technicians to be working in the same area and still be
able to uniquely identify the cable being traced.
Pressing the Up/Down cursor key scrolls between the four transmitted patterns.
Pressing the Select function key advances the arrow to the Band field where one of
four frequencies can be selected.
Press the Save function key to store the displayed Pattern and Band as the
Default for Toning.
CABLE LIBRARY SETUP
TheCableTool has one cable library for general electrical applications and one
for CATV installers. Pressing the Up/Down cursor key scrolls between the two
libraries. Pressing the Select function key makes that library of cable types avail-
able for all length measurements.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Psiber CT 50 Cable Tool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Psiber CT 50 Cable Tool in the language / languages: English, German, French as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info