Manual Proxxon MICROMOT Motorized Carver MOS (page 8 of 10) (English)

782208

Zoom out

Zoom in

1/10

- 8-

Spare parts list for MICRO Milling Machine MF 70, Article NO. 37110

Please order spare parts in writing from PROXXON Central Service

(Address on back of instruction manual)

Part No.: Designation Part No.: Designation

27110- 01 Work table

27110- 02 Support

27110- 03 Base plate

27110- 04 Cutting guard

27110- 05 Cutting guard base

27110- 06 Upper cover

27110- 07 Lower cover

27110- 08 Upper intermediate plate

27110- 09 Lower intermediate plate

27110- 10 X spindle

27110- 11 Y spindle

27110- 13 Handwheel

27110- 14 Handle

27110- 15 Scale ring

27110- 16 Cap

27110- 17 Upper adjusting plate

27110- 18 Lower adjusting plate

27110- 19 Scale

27110- 20 Bushing

27110- 21 Rivet

27110- 22 Spring

27110- 31 Washer

27110- 32 Pin

27110- 33 Screw

27110- 34 Short set screw

27110- 35 Long set screw

27110- 36 Nut

27110- 37 Screw

27110- 38 Screw

27110- 39 Brass bushing

27110- 40 Plastic bushing

27110- 41 Handwheel

27110- 42 Pin

27110- 43 Scale ring

27110- 44 Washer

27110- 45 Bushing

27110- 46 Cover

27110- 47 Screw

27110- 48 Stop nut

27110- 49 Z spindle

27110- 50 Z pillar

27110- 51 Upper spindle cover

27110- 52 Spindle nut

27110- 53 Lower spindle cover

27110- 54 Base

27110- 55 Screw

27110- 61 Collet chuck (accessories)

27110- 62 Collet nut

37110- 64 Speed Table

37110- 65 Switch

27110- 66 Rotary knob

27110- 67 Shaft

27110- 68 Nut

27110- 69 Set screw

27110- 70 Motor screw

27110- 71 Clamp screw

37110- 72 Power cord

27110- 75 Screw for motor plate

27110- 76 Adjusting plate

37110- 77 Board

37110- 78 Motor

27110- 80 Cover

27110- 81 Strain relief

27110- 82 Screw for strain relief

27110- 84 Scale

27110- 85 Spring

27110- 86 Spring washer

27110- 88 Spanner 13 mm (not shown)

27110- 89 Spanner 10 mm (not shown)

27110- 92 Anti-kink-grommet

27110- 95 Motor plate

27110- 96 Earth screw

37110- 97 Packaging (not shown)

37110- 99 Manual and Safety instructions (not shown)

27110- 100 Serrated washer

27110- 103 Ball bearing

27110- 105 O-ring

27110- 106 Main housing

27110- 107 Bushing

27110- 108 Shaft

27110- 109 Driver

27110- 110 Screw

27110- 111 Rubber ring

27110- 112 Driver with fan

27110- 114 Adjusting washer

27110- 12a Spindle nut

27110- 12b Spindle nut

27110- 30a Nut

27110- 30b Nut

Fig. 2 a Fastening set

Fig. 2 b Claw set

Fig. 2 c Fastening set

Prox-Tech, Inc., (“Seller”) warrants to the original purcha ser only,

that all PROXXON consumer power tools will be free from defects

in material or workmanship for a period of two years from the date

of purchase. Seller’s sole obligation and your exclusive remedy

under this limited warranty and, to the extent permitted by law, any

warranty or condition implied by law, shall be the repair or replace -

ment of parts, without charge, which are defective in material or

workmanship and which have not been misused, carelessly

handled, or misrepaired by persons other than Seller or Authorized

Service Station. In the event of a failure of a product to conform

to this written warranty, please refer to the Service and Repair

section on the back of this manual and take action accordingly.

This Limited Warranty does not apply to accessory items such as

circular saw blades, drill bits, router bits, jigsaw blades, sanding

belts, grinding wheels and other related items. Damage to the

product resulting from tampering, accident, abuse, negligence,

unauthorized repairs or alterations, unapproved attachments or

other causes unrelated to problems with material or workmanship

are not covered by this warranty.

Any implied warranties shall be limited in duration to two years

from date of purchase. Some states in the U.S. and some

Cana dian provinces do not allow limitations on how long an

implied warranty lasts, so the above limitation may not apply

to you.

In no event shall seller be liable for any incidental or conse -

quential damages (including but not limited to liability for loss of

profits) arising from the sale or use of this product. Some states

in the U.S. and some Canadian provinces do not allow the

exclusion or limitation of incidental or consequential damages;

so the above limitation or exclusion may not apply to you.

This limited warranty gives you specific legal rights, and you may

also have other rights, which vary from state to state in the U.S.,

province to province in Canada and from country to country.

This limited warranty applies only to PROXXON power tools sold

within the United States of America, Canada, the commonwealth

of Puerto Rico and Mexico. For warranty coverage within other

countries contact your local PROXXON Importer.

LIMITED WARRANTY OF PROXXON POWER TOOLS FOR HOME USE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon MICROMOT Motorized Carver MOS in the language / languages: English as an attachment in your email.

The manual is 0.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proxxon MICROMOT Motorized Carver MOS Manual

Product: