782204
3
Zoom out
Zoom in
Previous page
1/7
Next page
- 4 -
Foreword
Dear Customer,
Before putting the machine into operation, read the
enclosed safety rules and operating instructions!
This manual comprises:
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Specific Safety Rules for Rotary Tools . . . . . . . . . . . . .5
Safety regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Description of the machine . . . . . . . . . . . . . . . . . . . . . . .7
Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . .7
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Clamping, changing tools . . . . . . . . . . . . . . . . . . . . . . .7
Working with the machine . . . . . . . . . . . . . . . . . . . . . . .7
Accessories: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Operating Speeds for Accessories . . . . . . . . . . . . . . . .8
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Please note!
Using this manual will
• help you to understand the machine,
• avoid malfunctions caused by faulty operation,
• increase the lifetime of the machine.
Always keep this manual close at hand.
Do not operate the equipment unless you are fully familiar
with it. Follow the instructions.
The manufacturer will not assume liability for safe
functioning
• if the unit is used in a way which does not comply with the
usual modes of operation,
• if it is used for purposes other than those mentioned in
these instructions,
• if the safety regulations are not observed.
No warranty claims can be lodged for damage resulting
from
• operating errors,
• insufficient maintenance.
Please observe the safety regulations for your own safety.
Use only original spare parts.
We reserve the right for technical modifications without
prior notification.
We wish you much success with your drilling and milling
machine 40 (E).
GENERAL SAFETY RULES
Warning! Read and understand all instructions.
Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
Save these instructions.
Work Area:
Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or
fumes.
Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.
Electrical Safety:
Double Insulated tools are equipped with a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a
polarized outlet.
Do not change the plug in any way.
Double Insulation eliminates the need for the three wire
grounded power cord and grounded power supply
system.
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased
risk of electric shock, if your body is grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord to carry the
tools or pull the plug from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of
electric shock.
When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W."
These cords are rated for outdoor use and reduce the risk
of electric shock.
Personal Safety:
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use tool while
tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon MICROMOT 50-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon MICROMOT 50-E in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info