490658
13
Zoom out
Zoom in
Previous page
1/17
Next page
11
REVISED: 11/20/01
MAINTENANCE
Cleaning the machine
Always disconnect the main power from the unit before attempting to clean or repair it.
Dust the lamps with a dry cloth - do not use cleaning fluid or alcohol. The acrylics should
be taken out at least once every week of operation and cleaned thoroughly with a non-
alcoholic disinfectant glass or surface cleaner. If alcohol is used, the acrylic may fade,
crack, or break altogether. Failure to use anything other than an approved cleaning
material on the acrylic will result in poor UV-transmission, and could eventually cause
injury to the person using the machine. Use a vacuum cleaner with a dust nozzle to clean
around the ballast racks and throughout the interior portions of the base, top deck, and
bench.
Longevity of the acrylic sheets
The acrylic sheets used in this machine should be changed between 1200 and 1500 hours
of operation. If not, UV-transmission could be greatly reduced.
ProSun
®
recommends the use of Lucasol or Solacryl when cleaning acrylic sheets
Longevity of the lamps
Most lamps will display up to 120% of rated output during the first 50 hours of
illumination. As such, exposure schedules should be reduced by 20%, or sunburning may
occur. After the initial 50 hours, the lamps will run at 100% of their rated output and
gradually go down from there, until about 800 hours, whereupon the lamps should be
replaced.
IMPORTANT: When replacing or cleaning Facial Lamps, both facial lenses and
bulbs should be cleaned with alcohol, being free of smudges and finger prints
Please note:
ProSun
®
recommends changing blue filter glass after every 1000 hours of use to
maintain peak performance and safety of your tanning equipment.
WARNING DANGER
NEVER use this unit if the blue filter glass is missing, cracked or
otherwise damaged. SEVERE INJURY may result within seconds.
We recommend changing blue filter glass after 1,000 hours of use.
What to do with old lamps?
Contact your local garbage disposal company or city authority to find out what is the
most environmentally sound manner of throwing away old fluorescent lamps.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosun 2800 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosun 2800 Series in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info