490660

Prosun 2400 Series Manual

14
Zoom out
Zoom in
Previous page
1/17
Next page
REVISED: 11/20/01
12
PREVENTIVE MAINTENANCE
Frequency
Clean
Acrylic
Top &
Bottom
Clean
Pillow
Inspect
Facial
Glass
If
applicable
Clean &
Sanitize
Goggles
Ensure
Click
Strips is
firmly in
place
Clean and
Sanitize
Bed
Exterior
Remove
& Clean
the inside
both
Acrylic
sheets
Dust
Lamps
Wipe and
Vacuum
fans &
vents
Clean all
Reflectors
Wipe and
Vacuum
out Vent
Hoses
Inspect
Acrylic
for cracks
wear
Replace
Top and
Bottom
Acrylic
Adjust
shock
tension (if
needed)
Check
combi set
bolts for
proper
tightness
Inspect
Vent
Hoses for
Optimum
Vent-
illation
After Each
Session
* * * * *
Daily
* * * * •
Weekly
* * * * * * • •
Monthly
* * * •
Every 1200
hrs. Of use
•
* Please Refer to the Lamp Manufacturer Specifications for Lamp and Facial Lamp Replacement and Frequency.
When replacing Facial Lamps ensure that any fingerprints on the lamp itself are wiped clean using the cleaning pad provided with replacement lamps or alcohol.
PROSUN® recommends the use of Lucasol or Solacryl when cleaning acrylic sheets
* Certified by: International Smart Tan Network.
For information about becoming a certified member, call or write to: International Smart Tan Network, 3101 Page Avenue, Jackson, MI 49203, (517) 784-1772
The acrylic sheets used in this machine should be changed between 1200 and 1500 hours of operation. If not, UV-transmission could be greatly reduced.
PROSUN® recommends the use of Lucasol or Solacryl when cleaning acrylic sheets
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

prosun-2400-series

Reset search

  • My bulbs and fan are not coming on on the bottom part of bed, top is on. Submitted on 3-9-2020 at 05:21

    Reply Report abuse

  • Prosun 24 plus 2002 model,what size cable do I need for 30 amp breaker? Submitted on 9-5-2020 at 22:58

    Reply Report abuse

  • Does the bed have reflectors that need to be changed Submitted on 31-1-2020 at 03:40

    Reply Report abuse

  • Why does the manual say you can tan every 24 hours and the label on the tanning bed say you need to wait at least 48 hours? Submitted on 22-7-2018 at 22:48

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosun 2400 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosun 2400 Series in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info