Manual Proline OMX4 (page 5 of 32) (English, German, Dutch, French, Italian, Spanish)

495852

Zoom out

Zoom in

1/32

Downloaded from www.vandenborre.be

BEFORE FIRST USE:

Thoroughly clean all the parts of the blender before you use the blender for the first time (See chapter ‘CLEANING’).

OPERATION:

1. Place the motor base on a stable, level surface.

2. Mount the jug onto the motor base and turn the jug clockwise until it fixes properly.

Make sure the tabs on the bottom of the jug are aligned with the grooves on the top of the motor base.

Before fixing After fixing

3. Fill the jug with the desired food. Do not exceed the 1.5 litres.

Food to be blended should be cut into cubes (approximately 2-3 cm).

4. Place the lid onto the jug and turn the lid clockwise until it is fixed properly .

To open the lid, turn it anticlockwise.

5. Place the inner cover into the hole of the lid and turn the inner cover clockwise until it is fixed properly.

6. Plug the appliance into the mains socket.

7. Turn the selector dial to the desired speed setting (1, 2 or P).

The PUSLE function stays on as long as the dial is kept in the “P” position when crushing ice or blending food

very briefly.

To crush ice, press ICE until ice is crushed to the desired consistency.

8. To add food in the blending process, remove the inner cover by turning it anticlockwise and insert food through the

hole of the lid.

9. When the food has reached the required consistency, turn the selector dial to “0”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline OMX4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline OMX4 Manual

Product: