566811
4
Zoom out
Zoom in
Previous page
1/6
Next page
DRAADLOZE KLEURCAMERA
NL - 4
PSE-121
2.1 Er zijn 4 kanaalknoppen (CH1, CH2,
CH3, CH4) om het
overeenstemmende beeld van de
camera over te brengen.
OPMERKING: U kan ook op de
spatiebalk drukken om het juiste kanaal
te kiezen. De 4 kanalen stemmen
overeen met de volgende interferenties:
CH1 = 2,414MHz, CH2 = 2,432MHz,
CH3 = 2,450MHz, CH4 = 2,468MHz,
2.2 Klik op de sequentieknop om de
verschillende kanalen te overlopen.
Klik een 2
e
maal om het overlopen te
stoppen.
2.3 Klik het kanaal on/off om het kanaal
aan/af te schakelen.
2.4 Klik op de mute knop om het geluid
af te zetten. Als het geluid aan staat,
kan u het volume aanpassen naar de
gewenste luidsterkte.
2.5 Klik op de split-screen knop om het
scherm te verdelen in 1 of 4 beelden.
Per beeld wordt een kanaal
gereserveerd.
2.6 Klik op de snapshot knop om een
snapshot te nemen.
2.7 Klik op in- en uitzoomen om het
beeld 2x, 3x of max. 4x te vergroten
of verkleinen.
2.8 Klik op de “fullscreen knop” om het
beeld te bekijken op het volledige
scherm. Bij dubbelklik kom u terug in
het oorspronkelijke scherm.
3. Alarminstellingen
3.1 Het PIR alarm detecteert beweging.
De totale detectie afstand van 7 tem
10m is afhankelijk van de
verschillende temperaturen. Klik op
“IR detection” om het alarm aan te
schakelen. Klik nogmaals om het
terug uit te schakelen.
3.2 Het soundalarm detecteert geluid
boven 50dB. Klik op de knop om het
alarm te activeren. Klik een 2
e
maal
om het alarm terug uit te schakelen.
3.3 Klik op “schedule mission” om de
functie aan te zetten. De geplande
taken starten wanneer u uit de
instellingen gaat. Klik een 2
e
maal
om terug af te zetten.
3.4 De configuratie van de 3 alarmen
kan u opstarten door op de volgende
3 knoppen te klikken: “IR detectie,
sound detectie en schedule mission”.
De opnamefile kan u terugvinden
door te klikken op record file.
Parameters scherminstellingen
Klik op het menu en u ziet de volgende
parameters.
1. Security setup
Controleer “Enable password on
startup”, typ een paswoord in en
bevestig je paswoord door het nogmaals
te tikken. Klik vervolgens op OK.
Wanneer je nu de camera viewer
verlaten hebt zal je telkens je paswoord
moeten ingeven om er terug in te gaan.
2. Display setup
2.1 Camera alias: kan aangemaakt
worden voor verschillende
camera’s.
2.2 Met “channel loop” stelt u het
interval in van de automatische
opname.
2.3 Onder “On Screen Display” kan je
kiezen welke mogelijkheden op het
scherm moeten verschijnen.
2.4 Video instellingen:
Standaard: selecteer PAL of NTSC.
(Bij miscodering kan dit de reden
zijn van een fout beeld.)
Beweeg de balk om de helderheid,
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PSE-121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PSE-121 in the language / languages: Dutch as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info