We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product Then keep this manual in a safe
place.
Technical information
Working voltage: 230V (50Hz)
Maximum resistive capacity: 3500W/16A
Maximum inductive capacity: 460VA/2A
Day program: periods of 15 minutes.
Dustproof and splashproof: IP44.
Explanatory terms
Resistive appliances are appliances that consume the
same current quantity for the whole duration. E.g.
Lights.
Inductive appliances, on the other hand, consume
much more current at the start than in normal
operation. This includes coffee-makers, boilers, heating
appliances, etc.
If the inductive appliance exceeds the inductive
capacity of the time switch the appliance may not be
connected to it. If it is the switching contact in the time
switch will prematurely fail and this falls outside the
guarantee conditions.
Programming
The switching on and off times are simply programmed
by carefully pushing out the segments on the rotary dial
at the time the connected device must start operating.
The device will not operate at the times the segments are
left inward.
Setting the time
Now set the time switch to the correct time:
Turn the dial to the right until the arrow matches the
current time.
Immediately plug the time switch into the plug socket.
Repeat this procedure each time the time switch has
been removed from the plug socket.
Use
Insert the plug of the device to be activated in the plug
socket part of the time switch and plug the time switch
in the plug socket.
If the connected appliance has an “on-off” switch make
sure this is “on”.
Check that the time switch is set to the correct time.
Now switch the switch on the side of the time switch to
the clock
. If this switch is set to І the appliance will
continuously work and will not switch off at the set
times.
Safety instructions
The importer accepts no responsibility for damage
claims with respect to objects or persons that result
from incorrect use or non-compliance with the safety
instructions. All damage claims in such cases will be
declared null and void.
The timer must be connected to a mains voltage of
230V, max. fusing 16A.
Guarantee conditions
The guarantee period for the PCF-200 amounts to 2
years and commences on the date of purchase. During
this guarantee period Eltra nv will repair any defects
attributable to material or production faults. ELTRA NV
may choose to either repair or replace a defective
appliance.
ELTRA NV is not obliged to repair or replace
appliances if they have become defective as a result of
damage, inappropriate use, or modifications or
adaptations made after the purchase date.
Take any defective appliance together with the original
receipt back to the shop where the appliance was sold.
Always add a note with a description of the problem.
Damage
Eltra nv can under no circumstances whatsoever be
held responsible for damage of whatever nature if the
appliance was not correctly installed according to the
specified installation instructions, nor for damage as a
result of unforeseen circumstances such as natural
disasters, lightening strike, etc. All such resulting costs
are consequently at the expense of the buyer and are
not covered by the guarantee conditions.
www.eltra.eu
www.profileDIY.com
Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM
Eltra DIYeuronet/Elar bv, Ambachtsstraat 8, 5405 AM Uden,
THE NETHERLANDS
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Profile PCF-200 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Profile PCF-200 in the language / languages: English as an attachment in your email.
The manual is 0,59 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
