566751
1
Zoom out
Zoom in
Previous page
1/3
Next page
Profile Videophone EN - 1
PAC-112
We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product. Then keep this manual in a
safe place.
Technical data Monitor
Supply voltage adapter: 230VAC/15VDC 1,5A
Working current: 470 mA + 50mA
Operating temperature: -10°C to 50°C
Max relative humidity: 85%
Screen size: 7 Inches (diagonal)
Video system: PAL/NTSC
Total dimensions: 236(L) x 169(B) x 29(H) mm
Card types: SD, MMC, MS
File formats: JPEG, MPEG1, MPEG2, AV, MP3
Language: Chinese – English
Technical data Camera
Working current: < 300mA
Temperature for use: -20°C / +50°C
Type: pinhole camera
Focus/picture angle: 50°
Total dimensions: 122 (L) x 73 (B) x 44 (H) mm
Technical requirements for connections
Use either the cable supplied measuring 10 metres
or own wiring measuring 0.6 - 0.8mm² with a max.
length of 25 metres.
You need a plug socket that is max. 1.5 m from
the monitor.
Required wiring without door lock: 4
Required wiring with door lock: 6
Parts
Hands-free monitor
Camera
Protective cover for external unit
Mounting bracket for fixing the monitor to the wall
Support for monitor.
Fixing screws
Connecting cable 10 m
Safety instructions
The monitor or camera may never be cleaned with
detergents. Only use soap and a damp cloth.
The power wiring may never be cut through nor
extended; this renders the guarantee invalid!
The monitor may not be placed close to magnetic
fields such as next to a TV or thick power cables.
Water may never be poured over the camera or
monitor. The camera is only splashproof.
Assembly instructions
1. If there is not yet any wiring:
The position of the monitor is determined as
follows: the height amounts to approximately 165
cm, and is max. 150 cm from a plug socket where
the adapter will be plugged in. The connecting
cable between monitor and outside camera must
therefore come from the wall behind the monitor.
Provide a tube so the cable can move freely. If
possible also provide a tube with a sufficiently
large diameter (20-25mm).
Determine the position of the camera outside at
the door
. The ideal installation height is 155 to
165 cm. Shorter and taller persons then also
remain in picture.
Bring the camera cable to the monitor from outside
to inside; the cable is moulded.
Connect the wiring according to the diagram
below. We again emphasise that the power supply
wiring may not be extended or cut through: this
causes the appliance to work poorly and
invalidates the guarantee.
Cut off the cables with 2 cores without door lock.
If a door lock is to be connected, its connection
must be from the camera as shown on the diagram
above. The lock may consume no more than 300
mA and must have a memory function (the lock
remains free until just before the door is pushed
open). The 2 wires are already provided in a
moulded cable (4m)
2. if there is already existing wiring (max.
25m):
The wire diameter must be between 0.6 and 0.8
mm².
Shorten the moulded cables to the desired length
and strip the wires approximately 1cm. If an
electrical door lock is used: also strip the 2-core
cable over a length of 1cm.
The door lock is connected from the camera with
the moulded cable with two wires. The lock may
consume no more than 300 mA and must have a
memory function (the lock remains in a free
position as long as the door is not pushed open).
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PAC-112 Photoframe Videofoon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PAC-112 Photoframe Videofoon in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profile PAC-112 Photoframe Videofoon

Profile PAC-112 Photoframe Videofoon User Manual - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info