Manual Pro-User SC1600A JUMP STARTER (page 11 of 44) (English, German, Dutch, French)

722044

Zoom out

Zoom in

1/44

JUMP-STARTING YOUR CAR (12V)

NOTE:

Read your car´s owner's manual! Some vehicle manufacturers have special requirements before

jumpstarting the vehicle (e.g. fuses that have to be removed or certain security demands). Some vehicles

manufacturers place the battery in the cargo area or trunk. These vehicles often have designated jump-

start terminals.

Attention: Always follow the specific order to reduce of the risk fire and explosion.

Connect the SC1600A to the vehicle´s battery and prepare the device as described. Make sure the

supercapacitor is charged and the LCD display shows “JUMP START READY” (wait 10 seconds before

operation).

- Connect the red battery clamp to the vehicle's battery positive (+) terminal and connect the

black battery clamp to the vehicle's battery negative (-) terminal. Make sure the clamps are tight

and there’s no oxide or dirt on the vehicle battery’s terminal.

- Start your vehicle’s engine. Do not operate the starter for longer than 6 seconds. If the jump

start fails, wait at least 3 minutes before another attempt. Always check the display of the

SC1600A. After three failed attempts to jump start the car, check your vehicle for other possible

faults and damages than a weak battery.

- If the vehicle started, remove the jumper cables within 30 seconds. Disconnect the BLACK clamp

and then the RED clamp from the vehicle´s battery. Leave the vehicle's engine running.

If the device doesn’t react when pressing the power-button (3), low voltage protection might be active

and the device has to be charged with the help of the 12V input or the 5V USB input. Please make sure

to regularly charge the internal backup-battery in order to keep the device in good condition and to be

able to use the device´s full functionality.

TROUBLESHOOTING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User SC1600A JUMP STARTER in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pro-User SC1600A JUMP STARTER Manual

Product: