807474
3
Zoom out
Zoom in
Previous page
1/44
Next page
3
FEATURES
Automatic and Intelligent 5-Stage Charging Curve
The DFC900N is controlled by a 12-bit AD microprocessor with 5-stage charging
characteristic for charging batteries automobiles, motorcycles, snow mobiles, tractors,
personal watercraft, boats etc.
A microprocessor senses the condition of the battery and controls the regulator to provide
the right current and voltage to the battery (charging characteristic). This will give the best
effect on charging and give the longest life to battery.
Charging characteristic:
1) STD/GEL battery mode
2) Deep cycle battery mode
Soft Start: Initial battery test to determine battery condition. If the battery is severely
discharged charger will begin the Soft Start stage. Charging starts with reduced current
until battery voltage reaches a normal condition for charge.
Bulk: Major charging stage where the battery receives the majority of its charge.
During this stage the battery brought to 75 - 80% of its charger. The DFC900N charger
delivers maximum current until the terminal voltage has risen to the full charge level for
Normal battery.
Absorption: Completes the charge up to virtually 100% at a constant voltage. The
current tapers off until the current reached the minimum level.
Boost: (Only for Deep cycle battery) the battery is charged deeply at a constant current
and increased voltage to boost the charge capacity of the battery.
Float (Maintenance):
o For “STD” selection: The maintenance mode is using a charging at constant
voltage, keeping the batteries at 100% charge. Normal charging mode is
time-limited (max 10 days) while Float mode chargers indefinitely without
damaging the battery.
o For “DEEP” selection: The maintenance mode is using pulse charge. When
the battery voltage reaches upper limit(varied according to temperature), the
charger will stop supplying power and until the battery drops to 13,0V, it will
supply constant current again until the battery reaches upper limit. This will go in
cycle until the charging process has been stopped manually. This keeps the
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pro-User DFC900N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pro-User DFC900N in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 6.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info