712230
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
ENERGYSAVING TIPS
Install the appliance in a dry, well ventilated room far away
from any heat source (e.g. radiator, cooker, etc.) and in a
place not exposed directly to the sun. If required, use an
insulating plate.
To guarantee adequate ventilation follow installation
instructions.
Insucient ventilation on back of the product increases
energy consumption and decreases cooling eciency.
The internal temperatures of the appliance may be aected
by the ambient temperature, frequency of door opening,
as well as location of the appliance. Temperature setting
should take into consideration these factors.
Allow warm food and drinks to cool down before placing in
the appliance.
After placing the food check if the door of compartments
closes properly, especially the freezer door.
Reduce to a minimum door opening.
When thawing frozen food, place them in the refrigerator.
The low temperature of the frozen products cools the food
in the refrigerator.
Damaged gasket must be replaced as soon as possible.
High energy class products are tted with high eciency
motors that remain operational for longer, but have a low
power consumption. Do not worry if the engine continues
to run for longer periods
Before carrying out any maintenance or cleaning operation,
unplug the appliance or disconnect it from the power
supply.
Use the refrigerator compartment only for storing fresh food
and the freezer compartment only for storing frozen food,
freezing fresh food and making ice cubes.
Do not store glass containers with liquids in the freezer
compartment since they may break.
Avoid storing unwrapped food in direct contact
with internal surfaces of the refrigerator or freezer
compartments.
ELECTRICAL CONNECTION FOR GREAT BRITAIN AND IRELAND ONLY
Warning – this appliance must be earthed.
Fuse replacement
If the mains lead of this appliance is tted with a BS 1363A 13amp fused plug, to change
a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as
follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be retted when changing a fuse and if the fuse cover is lost the
plug must not be used until a correct replacement is tted.
Correct replacement are identied by the colour insert or the colour embossed in words
on the base of the plug.
Replacement fuse covers are available from your local electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin,
side earth type.
Socket outlet / plug (valid for both countries)
If the tted plug is not suitable for your socket outlet, please contact After-sales Service for further instruction.
Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualied technician incompliance
with the manufactures instructions and current standard safety regulations.
The bulb used inside the appliance is specically designed
for domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009)”.
The Manufacturer declines any liability for injury to
persons or animals or damage to property if the above
advice and precautions are not respected
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Privileg PFH406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Privileg PFH406 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Privileg PFH406

Privileg PFH406 User Manual - German - 4 pages

Privileg PFH406 User Manual - Dutch - 8 pages

Privileg PFH406 User Manual - French - 8 pages

Privileg PFH406 User Manual - Italian - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info