636661
37
Zoom out
Zoom in
Previous page
1/40
Next page
37
SYMPTOM
Won’t power On.
When the PTT is pressed -
Tx icon comes on and an-
other radio can hear a
“click” but no audio is heard.
While scanning, the radio
stops on a particular chan-
nel all of the time.
There is noise on the re-
ceiver that the squelch will
not eliminate.
CAUSE
No or low voltage.
Bad mic element.
A source of noise is nearby.
An external noise is being
generated by some device.
REMEDY
Check for proper voltage
getting to the set.
Send in for repair.
Eliminate the source of the
noise or delete the channel
from the scanner.
Either turn off the offending
device or contact that Mfg.
Troubleshooting
If the MC-8000 DSC does not perform to your expectations, try the suggestions listed below.
If you cannot get satisfactory results, call the GPE Technical Support
Warranty
This transceiver has a 3 years warranty for materials and workmanship in its country of
purchase against any manufacturing defect recognized by our technical department. It is
recommended to read carefully following conditions and to respect them in order not to loose
it.
Any repair under warranty will be free of charge and the transport costs for sending back
will be on charge of our company.
A proof of purchase must compulsorily be added to the transceiver in need of repair.
Don’t install your transceiver without having read this instructions manual.
Our technical department won’t send nor exchange any spare parts as part of warranty.
Are not covered
Immersion higher than : 30 minutes, 1 meter (IPX7)
Damages caused by accident , shock , inadequate packing or the use of accessories that
are not in conformity.
Interventions that modified the conformity features, repairs or modifications done by third
parties which are not agreed by our company.
Any opening of the housing cancels the warranty.• Any opening of the housing cancels
the warranty.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President MC 8000 DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President MC 8000 DSC in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of President MC 8000 DSC

President MC 8000 DSC User Manual - English - 48 pages

President MC 8000 DSC User Manual - German - 36 pages

President MC 8000 DSC User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info