558749
2
Zoom out
Zoom in
Previous page
1/16
Next page
2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.
BEFORE USE
You must inspect the appliance including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your supplier
immediately.
INSTALLATION
For free-standing use: Attach the two castor-wheel brackets to the underneath
of the heater using the eight M4x8 mm screws (four in each bracket). The longer
side of the bracket goes at the back of the heater. Attach two castor-wheels to
each bracket using the dome-nuts provided.
To wall-mount: Depress the two clips and remove the wall-mounting bracket
from the heater. Using the bracket as a template, and using a spirit level to
makes sure that the bracket is fitted level, drill four holes in the wall, the lower
holes should be be at least 160 mm above the floor. Insert a wall-plug into each
hole. Fix the bracket to the wall with the four screws supplied. Align the two
raised areas on the back of the heater with the lower part of the bracket, then
clip the heater into the bracket at the top (see photo).
If correctly installed the heater will be firmly fixed at both top and bottom.
PAT TESTING
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prem-i-air EH1552 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prem-i-air EH1552 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info