Page 3
Stand the EH1419 on a firm, flat, level surface, and apply the
brakes to the rear castors.
For industrial spot cooling, no hot air ducting is required.For
zone cooling use 18" (457 mm) ducting. Never use reducers,
as they cause the exhaust air to be compressed, generating
heat, reducing efficiency, and reducing the output of cooled
air.
The appliance collects condensed water in the tank, so the
exhaust air is dry, and may be vented into a false ceiling.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified
electrician at least once every 10 years or at every change of
occupancy.
For office and retail premises, and buildings such as village
halls, the wiring must be inspected at least once every 5
years.
It is recommended that all building be fitted with smoke
alarms (it is mandatory for new buildings).
PAT TESTING.
When used in an office or commercial environment, this
product must be safety-tested yearly by a qualified electrician
(PAT Tested) in order to comply with the Electricity at Work
Regulations. If hired out, it should be PAT tested before
every hire.
We recommend that it is PAT tested regularly when used in
a domestic environment.
