604310
56
Zoom out
Zoom in
Previous page
1/58
Next page
EFX5.17i Elliptical Fitness Trainer Assembly Guide 6
Insert the water bottle holder
into the bracket on the back of
the display console. Press firmly
until it snaps into place.
Press the end cap into
the base tube.
Thread the hex nut and height
adjuster into the base. Wrench
tighten the nut.
Remove the packing
material.
Clean the ramp with a soft cloth dampened in a
diluted solution of mild soap and water.
Level the EFX.
Before exercising, make sure the EFX does not wobble from side to
side or front to back. Ask a capable person for help to make
adjustments.
Important: If the unit is placed on a slightly uneven surface,
adjusting the rear pads can help, but will not compensate for
extremely uneven surfaces.
1. To remove any side-to-side
movement, rotate the rear pads.
2. To counteract any front-to-back
rocking motion, ask your assistant to
grasp the upper handrails and raise
the front of the unit off the floor. Use
a crescent or combination wrench to
loosen the nut on the height adjuster.
3. Turn the height adjuster to eliminate
the rocking motion.
Once you have the proper height
adjustment, use the wrench to turn
the nut and tighten it securely against
the base tube.
Important: If, after performing the
steps above, the unit still rocks
slightly from front to back, you may
need to remove the nut on the height
adjuster.
4. Have your assistant carefully lower the unit to the floor.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX 5.21I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX 5.21I in the language / languages: English as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info