Manual PowerTech PTG Controller (page 6 of 7) (English)

685340

Zoom out

Zoom in

1/7

Manual: PTG Controller Quick Start Guide

2.2 Using the Menu System

Task

Description

Entering Menu

When in the OFF mode, press the enter button to bring up the

menu.

Navigating Menu

Once in the menu, use the up and down arrows to navigate.

Pressing enter will move you into that menu.

Scroll Parameters

When in Auto or Running mode, pressing the up and down

arrows will scroll through the parameters pages.

Lock Screen

When in Auto or Running mode, you can lock the screen onto a

certain parameter page by pressing enter. You can unlock the

screen by pressing enter again.

Events History

Once in the menu, select Events History to view the most recent

controller event. Use the up and down arrows to navigate to other

events. The controller can store up to 150 events. If more than

150 events occur, the oldest event is deleted to make room for

the next event.

2.3 Modes, Starting and Stopping Methods

The following table describes the different operating modes of the controller:

Modes

Mode / State

Description

OFF

When in the OFF mode, the engine cannot be remotely started.

Auto

When in the Auto mode, the engine waits to receive a start

command.

Running

When engine is Running, the controller monitors engine

parameters and waits to receive a stop command.

Failure

When a failure occurs, the controller shuts down the engine and

displays reason for failure. The unit must be reset using the front

panel OFF button with the exception of Modbus.

When in the menu you can change settings and view the events

history.

The following table describes the different methods in which a controller can start. The

controller must be in the AUTO mode in order to start for all methods with the exception

of Manual Run.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTG Controller in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PowerTech PTG Controller Manual

Product: