541870
1
Zoom out
Zoom in
Previous page
1/6
Next page
PowerTap Pro Disc InstallaƟon Guide
Warnings:
 Rotor may become very hot during use. Avoid contact during and
directly after riding.
 Rotor may contain sharp edges. Avoid contact while the wheel is spinning.
 Installation should only be completed by a trained technician. Improper
installation could cause serious or fatal injuries.
 This product is designed for cross country use only.
Maintenance and Break-in:
 A break-in period of 30-40 complete, moderate stops is required
for the rotors to reach full braking power.
 Disc rotor may be periodically cleaned with Isopropyl Alcohol.
 Rotor bolts should be periodically checked for proper tightening torque.
 To replace batteries, rotor must first be removed. Refer to page 36 of
owner’s manual for additional instructions.
Assembly Instructions:
This kit includes:
Assemble as shown:
Notes:
 Tighten bolts to 55in-lbs, in star pattern.
 Optional—M5x0.2mm shims may be used between hub and rotor to center rotor in caliper.
1x 1x
16x
8x
1x
Additional Information/Replacement Parts
 For replacement rotors, please contact Saris.
 See complete Owner’s Manual for additional information.
M5 x 0.2mm shims
M5 x 12mm bolts
T25 Torx Wrench
MTB Disc PowerTap Hub
160mm PowerTap Disc Rotor
Saris Cycling Group, Inc. 5253 Verona Road Madison WI 53711 800.783.7257 www.powertap.com 21609 05/13
Hub/Wheel Building Information:
 Spoke Holes—32
 Disc Rotor Diameter—160mm
 Hub Over-Locknut Distance —135mm
 Non-drive side flange dimensions:
 Flange Diameter—74.0mm
Center to Flange—31.3mm
 Drive-side flange dimensions:
Flange Diameter—70.0mm
Center to Flange—18.5mm
 IMPORTANT: For your safety, the
non-drive side of the PowerTap hub
must be built with at least a 3x lacing
pattern. Because of the patented
PowerTap design, torque is transferred
through the hub to the non-drive side.
Failure to adhere to this precaution will
void the warranty.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powertap Pro - MTB Disc Hub at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powertap Pro - MTB Disc Hub in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info