Manual Powertap PowerCal (page 2 of 12) (English, German, Dutch, French, Italian, Spanish)

541864

Zoom out

Zoom in

1/12

BATTERY REPLACEMENT

• Using coin or a wide blade screwdriver turn

the battery cap counterclockwise one quarter

turn.

• Remove the battery cap and replace the old

battery with a new CR2032 battery. Ensure the

positive (+) side faces up.

• Install the battery cap by turning it one

quarter turn clockwise.

TROUBLESHOOTING

No power meter found by display.

• Ensure the correct pairing procedure using

the device user manual.

• Change the CR2032 battery.

WARRANTY

In the event that warranty service is required,

original sales receipt may be required.

The PowerCal is warranted to the original retail

purchaser to be free from defects in materials

and workmanship. Warranty coverage is valid

to the original purchaser only and proof of

purchase will be required.

• Electronics - 1 year

- 2 years (Europe)

THIS WARRANTY DOES NOT COVER:

• Normal wear and tear.

• Any damage, failure or loss caused by

accident, misuse, neglect, abuse, improper

assembly, improper maintenance, or failure to

follow instructions or warnings in User Guide.

• Use of products in a manner or environment

for which they were not designed.

CAUTION!

The manufacturer is not responsible for any radio or

TV interference caused by unauthorized

modiﬁcations to this equipment. Such modiﬁcations

could void the user authority to operate the

equipment.

LIMITATIONS

The foregoing warranties are in lieu of and exclude

all other warranties not expressly set forth herein,

whether expressed or implied by operation of law or

otherwise, including, but not limited to, warranties

of merchantability or ﬁtness for a particular

purpose. PowerTap shall in no event be liable for

incidental or consequential losses, damages or

expenses in connection with its exercise products.

PowerTap’s liability hereunder is expressly limited to

the replacement of goods not complying with this

warranty or, at PowerTap election, to the repayment

of an amount of the purchase price of the exercise

product in question. Some states do not permit the

exclusion or limitation of implied warranties or

incidental or consequential damages, so the

preceding limitations and exclusions may not apply

to you.

PROCEDURES

Warranty service will be performed by PowerTap or

an authorized PowerTap Dealer. The original

purchaser must provide proof of purchase. Service

calls and/or transportation to and from the

Authorized PowerTap Dealer are the responsibility of

the purchaser.

• PowerTap will have the option to repair or replace

any product(s) which requires warranty service.

• PowerTap will replace any unit that is structurally

defective with a new unit or replace the unit with a

unit of equal value.

• In the event a product cannot be repaired,

PowerTap will apply a limited credit reimbursement

toward another PowerTap product of equal or

greater value.

FCC STATEMENT: This equipment has been

tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

To assure continued compliance, any changes or

modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s

authority to operate this equipment. (Example-

use only shielded interface cables when

connecting to computer or peripheral devices).

This device complies with FCC radiation exposure

limits set forth for an uncontrolled environment

and it also complies with Part 15 of the FCC RF

Rules. This transmitter must not be co-located or

operating in conjunction with any other antenna

or transmitter. Operation is subject to the

following two conditions:

(1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

PowerTap 5253 Verona Road Madison WI 53711 608.274.6550 www.powertap.com 21610A 05/13

3 Volt

CR2032

Note: After the battery is

replaced the PowerCal

will have a new sensor ID

so re-pairing is essential.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powertap PowerCal in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powertap PowerCal Manual

Product: