POWXQG7515 EN
Copyright © 2018 VARO P a g e | 9 www.varo.com
8.2.3 Connection for Auto move (Fig. 9)
CAUTION: your mower is designed to cut normal residential grass of a
height no more than 250mm.
Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry
leaves. Debris may build up on the mower deck or contact the engine exhaust presenting a
potential fire hazard.
9 SAFETY PRECAUTIONS (FIG 6)
▪ Always operate with the deflector or grass catcher in the correct position.
▪ Always stop the motor before removing the grass catcher or adjusting the height of cutting
position.
Before mowing, remove all foreign objects from the lawn which may be thrown by the
machine. While mowing, stay alert for any foreign objects which may have been missed.
Never lift the rear of the mower while starting the motor or during normal operation.
Never place your hands or feel underneath the floor pan or into the rear discharge chute
while the motor is running.
10 STARTING
Before connecting up the lawn mower to the electric power supply, make sure that the mains
supply voltage is 230-240 V~50 Hz. Before start the lawn mower, fixed the extension cord with
the machine as shown in Fig. 10 A-B
When the lawn trimmer power on, the indicator light will turn on. (Fig 7) Start the motor as
follows:
▪ Press the safety push-button. (3)
▪ And meanwhile, pull the switch handle, and keep it in grasp. (2)
If you release the switch handle, the motor will stop.
CAUTION! The blade starts turning as soon as the motor is started.
WARNING! Cutting elements continue to rotate after the motor is switch off.
CAUTION! The equipment is suitable for use only in a power supply which
permissible modulus of system impedance is 0.320Ω or less.
10.1 For the best results when mowing
Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign
objects which could be accidentally thrown out by the mower in any direction and cause
serious personal injury to the operator and others as well as damage to property and
surrounding objects. Do not cut wet grass. For effective mowing do not cut wet grass because
it tends to stick to the underside of the deck preventing proper mowing of the grass clippings.
Cut no more than 1/3 the length of the grass. The recommended cut for mowing is 1/3 the
length of the grass. Ground speed will need to be adjusted so the clippings can be dispersed
evenly into the lawn. When mowing long grass you may have to cut the lawn in two passes,
lowering the blade another 1/3 of the length for the second cut and perhaps cutting in a
different pattern than was used the first time. Overlapping the cut a little on each pass will also
help to clean up any stray clippings left on the lawn. Clean underside of deck.
Be certain to clean the underside of the cutting deck after each use to avoid a build-up of
grass, which would prevent proper mulching. Mowing leaves. The mowing of leaves can also
be beneficial to your lawn. When mowing leaves make sure they are dry and are not laying too
thick on the lawn.
