481020
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWXQ5401 EN
Copyright © 2014 VARO NV P a g e | 5 www.varo.com
7.1 Attaching the sandpaper
Disconnect the tool from the power-supply before changing sanding paper.
7.1.1 Paper clamps
Open the paper-clamps on both sides of the base-plate and remove the worn-out sanding-
paper.
Place a new sanding-paper on the base-plate observing the holes in the sanding-paper fit
to the holes of the base-plate.
Bend the paper to the base-plate and fasten one clamp first. Press the sanding-paper
against the base-plate, bend the other end and fasten second clamp.
Attention: This finishing sander is not suitable for wet sanding jobs.
7.1.2 Hook-and-loop system
To attach sanding paper, first remove all dirt or foreign matter from the sanding base plate.
Then attach the sanding paper to the sanding base plate, using the hook-and-loop system
of the sanding paper and the sanding base plate.
Make sure the perforations in the paper coincide with those on the sanding base plate, to
ensure optimal dust collection.
The sandpaper should rest flush on the base plate and must not come loose.
7.2 Attaching the dust bag
Use always the supplied dust bag in importance of your health (7) when you work with the
machine
8 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
8.2 Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
In case of wear, replace both carbon brushes at the same time.
Mount the carbon brush holders.
After mounting new carbon brushes, let the machine run at no load for 15 minutes.
Use only the correct type of carbon brushes.
8.3 Connecting cable and mains plug
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5401 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5401

Powerplus POWXQ5401 User Manual - German - 9 pages

Powerplus POWXQ5401 User Manual - Dutch - 8 pages

Powerplus POWXQ5401 User Manual - French - 8 pages

Powerplus POWXQ5401 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info