715063
7
Zoom out
Zoom in
Previous page
1/9
Next page
POWXG9447 EN
Copyright © 2016 VARO NV P a g e | 7 www.varo.com
11 TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The electric motor is
running but the pump
does not suck water
1. After the pump starts, the pump
body does not fill with water
1. Fill the pump with water
2. Insufficient tightness of the
suction hose
2. Check the recommended and
used pans and components of the
pump, e.g. joint of the suction
nose, joint of the pressure hose,
clamping ring, suction hose, etc.,
including screw sealing strip
made from Teflon or hemp cord.
The pump can work only when
well sealed
3. The filter screen of the non-
return valve of the sucking inlet is
blocked
3. Clean the non-return of the
sucking inlet and the filter screen
4. The air can't be released from
the pressure hose because the
water outlet is closed
4. When the pump starts sucking,
open the water outlet (e.g. the
tap. sprinkling nozzle etc.)
5. The waiting time does not
correspond to the regulations
5. Fill the whole suction hose with
water, or recheck it at least 7
minutes after the pump starts
6. Excessive suction head (>8m)
6. Reduce the suction head
7. The non-return fails to suck
water
7. Check the water level of the
well or the water pool. If possible,
increase the length of the suction
hose.
The electromotor cannot
run
1. No power supplied
1. Check the power supply
2. The ventilator hood obscures
rotation of the vane
2. Pull out the power plug, remove
the ventilator hood with a
screwdriver, then reinstall it again
by slightly rotating the vane and
check to see if it rotates freely
3. Fan blocked
3. Pull out the power plug, move
the shaft with the screwdriver
through the ventilator hood. If the
shaft is blocked, send it to a
service center for inspection
Insufficient water flow-
out
1. Excessive suction head (>8m)
1. Check the suction head
2. The filter screen of the non-
return is blocked
2. Clean the filter screen
3. The suction water level lowered
too much
3. Immerse the non-return in deep
water
4. Impurities have reduced the
effective capacity of the pump
4. Wash the shell of the pump, the
suction hose and the outlet
pressure hose with pressurized
water
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG9447 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG9447 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG9447

Powerplus POWXG9447 User Manual - German - 9 pages

Powerplus POWXG9447 User Manual - Dutch - 9 pages

Powerplus POWXG9447 User Manual - French - 9 pages

Powerplus POWXG9447 User Manual - Italian - 9 pages

Powerplus POWXG9447 User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info