672549
8
Zoom out
Zoom in
Previous page
1/13
Next page
POWXG9035 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
7.4 Connection of garden hose (Fig. 4)
1. Screw the water inlet coupling tight on to the water inlet Note: The inlet filter (A) must
always be fitted in the water inlet pipe to filter out sand, lime stone and other impurities as
these will damage the pump valves. Caution: Failure to fit the filter will invalidate the
guarantee.
2. Connect the garden hose with a standard quick coupling
7.5 Mounting of high pressure hose (Fig. 5)
1. Attach the high pressure hose to the trigger gun and machine.
2. Detach the high pressure hose by pressing the pawl (A) or button (B)
7.6 Mounting of lance and nozzle (Fig.6)
1. Push the lance into the trigger gun
2. When inserted turn it. Caution: Make sure the lance is properly fixed to the gun
3. Attach the nozzles. Caution: When attaching the nozzle the button (A) on the nozzle
should come out again. Check before activating the trigger that the nozzle is properly
fixed.
7.7 Use of built-in detergent bottle
1. Unscrew the lid built-in detergent bottle
2. Add detergent to built-in detergent bottle
3. Replace the nozzle of the spray gun to the soap nozzle
4. And then spray detergent
8 OPERATION
8.1 Water connection
Follow your water supplier’s instructions.
For connection information, see the data plate/technical specifications
Use a reinforced hose (not supplied) with a standard connection (ext. diameter: 16mm/int.
12mm, maximum length: 25m).
IMPORTANT! Only use water without any impurities. If there is a risk of
sand particles in the inlet water (i.e. from your own well), an additional filter
should be mounted.
1. Let the water run through the water hose before connecting it to the machine to prevent
sand and dirt from penetrating the machine. Note: Check that the filter is fitted in the
water inlet pipe and that it is not clogged up.
2. Connect the water hose to the water supply by means of the quick connector (inlet water,
max. pressure: 10 bar, max. temperature: 40°C).
3. Turn on the water.
8.2 Start/stop of the machine
The trigger gun and lance is affected by a thrust during operation - therefore always hold it
firmly with both hands.
IMPORTANT: Point the nozzle at the ground.
This high pressure cleaner is equiped with an automatically sart/stop
system, based on waterpressure.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG9035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG9035 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG9035

Powerplus POWXG9035 User Manual - German - 15 pages

Powerplus POWXG9035 User Manual - Dutch - 14 pages

Powerplus POWXG9035 User Manual - French - 14 pages

Powerplus POWXG9035 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info