POWX4255 EN
Copyright © 2022 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
▪ Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
▪ Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪ Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
▪ Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
▪ Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
▪ Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS
▪ DO NOT use in place of a vehicle battery.
▪ Do NOT use as a toy.
▪ To reduce the risk of injury, close supervision is necessary when the product is used near
children.
▪ Jump for 12V vehicles , it would be hazard if for other jumping.
▪ Use of an attachment not recommended or sold by power pack manufacturer may result in
a risk of fire, electric shock, or injury to persons.
▪ Do NOT connect the two clamps together.
▪ Before starting, ensure that there is no corrosion on the car battery poles and no foreign
matter adheres. Connect the jump starter to the battery and hold tightly to avoid damaging
the jump start cables or plug caused by engine vibration.
▪ After successfully starting the car, please remove the product from the car battery within
30s, otherwise it may cause damage.
▪ Do NOT Jump Start more than 3 times in a row, It could damage the unit by overheating.
When starting up multiple times, each start-up interval is two minutes.
▪ Don’t use the jumper cable to charge other equipment.
▪ Do NOT store in locations where the temperature may exceed 60℃
▪ Charge only at ambient temperature between 0℃ and 45℃.
▪ Do not expose the product to rain or water
▪ Do NOT expose product to extreme heat or fire.
▪ Do NOT operate the product in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
▪ Make sure someone should be within range of your voice or close enough to come to your
aid when working with batteries.
▪ Do not use a battery pack or appliance that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
