795759
5
Zoom out
Zoom in
Previous page
1/7
Next page
POWX4251 EN
Copyright © 2022 VARO P a g e | 5 www.varo.com
Charge only using the charger provided with this unit or the same standard with the host
input port.
After jump starting the car, don’t charge this unit immediately.
Do NOT use the unit to jump start a vehicle while charging the internal battery.
Under extreme conditions, the battery may leak. If a liquid is noticed coming from product
do not handle with bare hands. In case of skin contact wash with soap and water
immediately. If liquid comes in contact with eyes rinse eyes with cold running water for at
least 10 minutes and get medical attention immediately.
Product contains lithium based battery, at end of product life dispose of product according
to local regulation.
7 OPERATION
7.1 Indicator
The indicator (1) will flash one by one during the period of charging. Different number of solid
indicators show different charge level. All indicators light off when the charging is paused or
completed.
Press the switch to check the charge level:
Indicator
No light
1 solid light
4 solid lights
Charge level
0%
25%
100%
7.2 Charging instruction
Plug the USB charger cable (10) to a USB adapter.
Connect the cable (10) to the input port (3) of the jump starter.
7.3 Jump start 12V vehicle
Connect the blue plug fully into the jump starter.
Connect the red clamp to the positive (+) battery terminal and the black clamp to the
negative (-) battery terminal.
Indicator lights of the cable
i. Green light: the connection is correct and the circuit is working.
You can turn on the engine to jump-start directly.
ii. Green light blinking: the vehicle battery is low, press the
“BOOST” button and wait until the green light becomes solid.
Turn the engine on within 30 seconds.
iii. Red light with buzzing noise: the connection is wrong. Check
the clamps connection and connect as described previously.
Wait until the green light is on to turn on the engine.
iv. No lights, no buzzing: the vehicle’s battery may be damaged.
After confirming the clamps are connected correctly, press the
“BOOST” button. Wait until the green light is on and then turn
on the engine within 30 seconds.
Start the vehicle.
When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the
vehicle’s engine running.
7.4 Charging mobile phones/tablets/…
For USB-C quick charging connect the USB charger cable (10) to the quick charge output
port (4). For regular charging you can connect to either USB output ports.
Select the appropriate connector and connect it to your device.
Press the switch button (2). It can recognize the electronic products’ suitable parameters
to start the charging process.
7.5 LED flash light
Press the switch (2) 3 seconds to start the LED flash light.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX4251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX4251 in the language / languages: English as an attachment in your email.

The manual is 0.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX4251

Powerplus POWX4251 User Manual - German - 8 pages

Powerplus POWX4251 User Manual - Dutch - 8 pages

Powerplus POWX4251 User Manual - French - 8 pages

Powerplus POWX4251 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info